No Access

Fault Detection Method of CNC Machine Tool Based on Wavelet Transform

Junying Liu

College of Mechanical and Electrical Engineering, Heyuan Polytechnic, HeYuan, GuangDong, China

E-mail Address: liu_jy1978@sina.com

https://doi.org/10.1142/S0129626421410012Cited by:2 (Source: Crossref)

Abstract

In order to overcome the problems of low detection accuracy and long detection time of traditional fault detection methods for CNC machine tools, a new fault detection method for CNC machine tools based on wavelet transform is proposed in this paper. In order to improve the effectiveness of running fault detection of CNC machine tools, a wavelet transform method is used to extract the features of the running fault signals of CNC machine tools. According to the feature extraction results, the convolution calculation of the continuous wavelet transform is used to complete the fault detection of CNC machine tool according to the scale result of fault signal. The experimental results show that, compared with traditional fault detection methods, the detection accuracy and efficiency of this method is significantly better: the highest detection accuracy is 97%, and the lowest detection time is only 1.1s.

Communicated by Gunasekaran Manogaran

Keywords:

References

1. R. Zhao, Simulation of intelligent detection method for local faults of CNC machine tools, Computer Simulation 37(5) (2020) 151–154, 239. Google Scholar
2. D. Song, R. Liang, W. Li and W. Chen, Design of remote intelligent fault diagnosis system for CNC machine tool, Journal of Data Acquisition & Processing 35(1) (2020) 177–184. Google Scholar
3. X. Xia and H. Lin, Research on health warning for rolling bearing of CNC machine tool based on self-learning SOM and ARMA algorithm, Journal of Chinese Computer Systems 40(1) (2019) 217–222. Google Scholar
4. D. Zhu, L. Wang, G. Yin and H. Wen, Fault diagnosis and simulation analysis of motorized spindle of CNC milling machine, Tool Engineering 53(1) (2019) 127–130. Google Scholar
5. M. Li, NC machine fault dignosis baded on LCD multi dispersion entropy, Journal of Mechanical Strength 41(3) (2019) 581–587. Google Scholar
6. M. Xin, Application of neural network training algorithm in fault diagnosis of NC machine tool, Techniques of Automation and Applications 3(9) (2020) 13–17. Google Scholar
7. Y. Liu, B. Xu, F. Chen and J. He, Research on fault prediction of NC machine tool based on grey theory, Modular Machine Tool & Automatic Manufacturing Technique 15(9) (2019) 93–96, 101. Google Scholar
8. K. Guo, Servo drive fault diagnosis and maintenance of XK713 NC milling machine, Modular Machine Tool & Automatic Manufacturing Technique 33(12) (2019) 70–71, 75. Google Scholar
9. H. Yu and X. Wang, Maintenance of over travel fault of CNC machine tool, Internal Combust-ion Engine & Parts 15(5) (2020) 159–161. Google Scholar
10. J. Xiong, X. Li, Y. Lu and X. Yuan, Research on CNC machine tools reliability modelling based on PSO, Machine Tool & Hydraulics 48(20) (2020) 23–27. Google Scholar
11. T. Lin, G. Chen, C. Teng, Y. Wang and W. Ouyang, Rolling bearing fault detection based on the hypersphere optimization support vector data description, Journal of Vibration and Shock 38(2) (2019) 209–215, 230. Google Scholar
12. F. Xu, Z. Jiang, N. Yu, H. Huang and Q. Yang, Research on VMD and PCT based fault diagnosis method for rotating machinery, Modular Machine Tool & Automatic Manufacturing Technique 26(11) (2019) 96–99, 104. Google Scholar
13. Z. Meng, S. Dong, X. Pan, W. Wu, K. He, T. Liang and X. Zhao, Fault diagnosis of bolling bearing based on improved convolutional neural network, Modular Machine Tool & Automatic Manufacturing Technique 11(2) (2020) 79–83. Google Scholar
14. M. Li and X. Chen, Machinery condition recognition and fault diagnosis of spindle based on LabVIEW, Manufacturing Technology & Machine Tool 27(12) (2020) 22–26. Google Scholar
15. W. Xu, J. Tan, L. Jing and X. Tang, Milling cutter wear condition signal monitoring method of CNC based on deep learning and multi-sensor, Machine Tool & Hydraulics 48(9) (2020) 71–74. Google Scholar
16. W. Luo, Reliability detection method for rolling bearing of numerical control machine tool based on strain modal, Science Technology and Engineering 19(17) (2019) 173–178. Google Scholar
17. H. Zhang, Fault diagnosis method of vehicle driving data acquisition devices based on data mining, Journal of Automotive Safety and Energy 10(1) (2019) 58–63. Google Scholar
18. X. Liu and X. Xu, Large electromechanical equipment fault diagnosis method based on deep belief network and multi information fusion, Machine Tool & Hydraulics 47(1) (2019) 134, 159–164. Google Scholar
19. H. Li, Common faults and diagnosis of hydraulic and pneumatic system of NC machine tools, Industrial Heating 49(3) (2020) 42–44. Google Scholar
20. G. Li, D. Wang, X. Zhang, L. Du and J. Dong, Status monitoring technology for machining center spindle system based on wavelet de-noising and EMD-SVM algorithms, Aeronautical Manufacturing Technology 62(6) (2019) 44–49. Google Scholar
21. R. Sundarasekar, M. Thanjaivadivel, G. Manogaran, P. M. Kumar, R. Varatharajan, N. Chilamkurti and C. Hsu, Internet of Things with maximal overlap discrete wavelet transform for remote health monitoring of abnormal ECG signals, Journal of Medical Systems 42(11) (2018). https://doi.org/10.1007/s10916-018-1093-4 Crossref, Web of Science, Google Scholar
22. N. T. Le, J. Wang, D. H. Le, C. Wang and T. N. Nguyen, Fingerprint enhancement based on tensor of wavelet subbands for classification, in IEEE Access 8 (2020) 6602–6615. https://doi.org/ 10.1109/ACCESS.2020.2964035 Crossref, Web of Science, Google Scholar
23. A. Belazi, A. A. El-Latif, A. Diaconu, R. Rhouma and S. Belghith, Chaos-based partial image encryption scheme based on linear fractional and lifting wavelet transforms, Optics and Lasers in Engineering 88 (2017) 37–50. https://doi.org/10.1016/j.optlaseng.2016.07.010 Crossref, Web of Science, Google Scholar
24. C. Hsu, G. Manogaran, P. Panchatcharam and S. Vivekanandan, A new approach for prediction of lung carcinoma using back propagation neural network with decision tree classifiers, 2018 IEEE 8th International Symposium on Cloud and Service Computing (SC2) (2018). https://doi.org/10.1109/sc2.2018.00023 Google Scholar
25. H. Huang, S. Ding, L. Zhao, H. Huang, L. Chen, H. Gao and S. H. Ahmed, Real-time fault detection for IIoT facilities using GBRBM-based DNN, IEEE Internet of Things Journal 7(7) (2020) 5713–5722. https://doi.org/10.1109/jiot.2019.2948396 Crossref, Web of Science, Google Scholar
26. C.-T. Yang et al., On improvement of cloud virtual machine availability with virtualization fault tolerance mechanism, The Journal of Supercomputing 69(3) (2013) 1103–1122. https://doi.org/10.1007/s11227-013-1045-1 Crossref, Web of Science, Google Scholar
27. J. Gao, H. Wang and H. Shen, Task failure prediction in cloud data centers using deep learning, IEEE Transactions on Services Computing 1(1) (2020). https://doi.org/10.1109/tsc.2020.2993728 Google Scholar
28. S. Basheer et al., Network support data analysis for fault identification using machine learning, International Journal of Software Innovation 7(2) (2019) 41–49. https://doi.org/10.4018/ijsi.2019040104 Crossref, Web of Science, Google Scholar