No Access

Interfacial properties of aramid/basalt fiber reinforced hybrid composites by addition of Halloysite nanotube

Major of Material Engineering, Department of Marine Equipment Engineering, Graduate School, Korea Maritime and Ocean University, Busan 49112, Korea

E-mail Address: zenith1179@naver.com

Search for more papers by this author

Tianyu Yu

Major of Material Engineering, Department of Marine Equipment Engineering, Graduate School, Korea Maritime and Ocean University, Busan 49112, Korea

E-mail Address: yutianyugod@foxmail.com

Search for more papers by this author

Soo-Jeong Park

Major of Material Engineering, Department of Marine Equipment Engineering, Graduate School, Korea Maritime and Ocean University, Busan 49112, Korea

E-mail Address: blue9069@naver.com

Search for more papers by this author

, and

Yun-Hae Kim

Major of Material Engineering, Department of Marine Equipment Engineering, Graduate School, Korea Maritime and Ocean University, Busan 49112, Korea

E-mail Address: yunheak@kmou.ac.kr

Corresponding author.

Search for more papers by this author

https://doi.org/10.1142/S0217984919400311Cited by:8 (Source: Crossref)

This article is part of the issue:

Special Issue: International Conference on "Physics and Mechanics of New Materials and Their Applications" (PHENMA2018), August 9–11 2018, Busan, South Korea; Guest Editors: Yun-Hae Kim, Ivan A. Parinov, Shun-Hsyung Chang and Pankaj Koinkar

Abstract

We investigated the effect of Halloysite nanotube (HNT) addition on the interfacial and bending properties of hybrid composites. Test specimens were prepared using a vacuum bag method, which is manufactured by using an autoclave device. Ultrasound device was used to uniformly disperse HNT nanoparticles into the epoxy. Amount of the nanoparticles was determined by the weight of the epoxy resin. The Fracture toughness, ILSS and bending strength of Aramid/Basalt fiber hybrid composite specimens were decreased by more than certain amount of HNT. This phenomenon is presumably due to aggregation of HNT.

Keywords:

References

1. I. S. Han, S. Y. Kim, S. K. Woo, K. S. Hong and D. W. Seo, J. Korean Ceram. Soc. 10 (2006) 607. Google Scholar
2. Y. H. Kim, J. W. Lee, C. W. Park and S. J. Park, J. Ocean Eng. Technol. 28 (2014) 351. Crossref, Google Scholar
3. J. W. Kim, Effect of temperature on flexural properties of carbon-basalt/epoxy interply hybrid composites, Master’s thesis, Chonbuk National University, Jeonju, South Korea (2014). Google Scholar
4. J. S. Jeong and S. K. Cheong, Compos. Res. 26 (2013) 141. Crossref, Google Scholar
5. Y. J. Moon, J. Y. Choi, B. A. Kim and C. K. Moon, J. Korea Soc. Power Syst. Eng. 14 (2010) 68. Google Scholar
6. M. S. Hong, K. M. Bae, W. K. Choi, H. S. Lee, S. J. Park, K. H. An and B. J. Kim, Appl. Chem. Eng. 23 (2012) 313. Google Scholar
7. J. W. Lee, Y. H. Kim, M. K. Jung, S. W. Yoon and J. M. Park, Compos. Res. 27 (2014) 14. Crossref, Google Scholar