Repairing damaged composite laminates using carbon fiber reinforced bulk mold compound
Abstract
This work used short carbon fibers (SCFs) of different lengths to manufacture epoxy bulk mold compound (BMC) composites. Drop-weight-impact tests were performed on the intact carbon-fiber-reinforced-polymers (CFRPs) laminates to generate artificial damage. The damaged CFRP laminates were then repaired using the SCF-BMC composites. Compression after impact (CAI) tests were conducted to measure the compressive strength of the repaired laminates. Tensile properties and compressive properties of the SCF-BMC composites were also measured. The results show that 48-mm carbon fibers result in the largest tensile modulus, tensile strength, and compressive strength, while 12-mm carbon fibers result in the largest compressive modulus. CAI test results show that the compressive strength of the repaired laminate can be restored to 80.3% of that of the undamaged laminate. Therefore, SCF-BMC composites significantly contribute to repairing damaged composite laminates.
