Research PaperFree Access

Graphical User Interface for Design, Analysis, Validation, and Reporting of Continuous-Time Systems Using Wolfram Language

Maja Lutovac-Banduka

Computer Based Systems RT-RK, Str. 2v Dunavska, Belgrade 11158, Serbia

E-mail Address: maja.lutovac-banduka@rt-rk.com

Search for more papers by this author

Danijela Milosevic

Faculty of Technical Sciences Cacak, University of Kragujevac, Svetog Save 65, Čačak 32000, Serbia

E-mail Address: danijela.milosevic@ftn.kg.ac.rs

Search for more papers by this author

Yigang Cen

Beijing Jiaotong University, Institute of Information Science, Haidian District, Shangyuancun 3, Beijing 100044, P. R. China

E-mail Address: ygcen@bjtu.edu.cn

Search for more papers by this author

Asutosh Kar

Department of Electronics and Communication Engineering, Dr BR Ambedkar National Institute of Technology, Jalandhar 144027, Punjab, India

E-mail Address: kara@nitj.ac.in

Search for more papers by this author

, and

Vladimir Mladenovic

https://orcid.org/0000-0001-8530-2312

Faculty of Technical Sciences Cacak, University of Kragujevac, Svetog Save 65, Cacak 32000, Serbia

E-mail Address: vladimir.mladenovic@ftn.kg.ac.rs

Corresponding author.

Search for more papers by this author

https://doi.org/10.1142/S0218126623502444Cited by:2 (Source: Crossref)

Abstract

A graphical user interface presented is intended for fast design, symbolic analysis, accurate simulation, exact verification, and test report preparation. It helps to skip the gap between theory and practice in electrical engineering because the numeric analysis is usually approximate, and the power of symbolic systems has insufficient speed even, for simple engineering problems. The software is written using a computer algebra system that is free on small computers. The mathematical representation of the system can be obtained automatically from the schematic description. Further automated symbolic manipulations are possible according to the user’s aspirations.

This paper was recommended by Regional Editor Zoran Stamenkovic.

Keywords:

References

1. M. Lutovac, D. Tosic and B. Evans , Filter Design for Signal Processing Using MATLAB and Mathematica (Prentice Hall, Upper Saddle River, 2001), pp. 1–756. Google Scholar
2. B. Kleinjohann, G. R. Gao and H. Kopetz (eds.), Design Methods Applications Distributed Embedded Systems, IFIP 18th World Computer Congress (Springer, New York, 2014), pp. 1–326. Google Scholar
3. S. Wolfram , An Elementary Introduction to the Wolfram Language (Wolfram Media, Champaign, 2017). Google Scholar
4. K. Strehl , Symbolic Methods Applied to Formal Verification and Synthesis in Embedded Systems Design (Swiss Federal Institute of Technology, Zurich, 2000). Google Scholar
5. B. L. Evans and J. H. McClellan , Symbolic analysis of signals and systems, Symbolic and Knowledge-Based Signal Processing, eds. A. V. Oppenheim and S. H. Nawab (Prentice Hall, Upper Saddle River, 1992), pp. 88–141. Google Scholar
6. E. Lunca1, S. Ursache1 and O. Neacsu1 , Graphical Programming Tools for Electrical Engineering Higher Education, Int. J. Online Eng. 7 (2011) 19–24. Crossref, Google Scholar
7. M. Lutovac-Banduka , Robotics First — A Mobile Environment for Robotics Education, Int. J. Eng. Educ. 32 (2016) 818–829. Web of Science, Google Scholar
8. M. Lutovac and D. Tosic , SchematicSolver — Schematic Capture, Symbolic Solving, Processing, and Implementation of Analog and Digital Systems 2.3, requires, Mathematica 9 (2022), https://www.wolfram.com/products/applications/schematicsolver/manual.pdf. Google Scholar
9. S. Wolfram, Wolfram Language & Mathematica free on every Raspberry Pi!, (2022), https://www.wolfram.com/raspberry-pi/index.php. Google Scholar
10. P. Harney, New Wolfram Mathematica free resources for your Raspberry Pi, (2022), https://www.raspberrypi.org/blog/new-wolfram-mathematica-resources-2019/index.php. Google Scholar
11. S. Wolfram, Wolfram Language & System, (2022), https://reference.wolfram.com/ language/index.html. Google Scholar
12. V. Pavlović, M. M. Lutovac and M. D. Lutovac , Automated knowledge-based filter synthesis using modified Legendre approximation and optimization of summed sensitivity, Int. J. Reason-based Intell Syst. 4 (2012) 17–27. Google Scholar
13. M. D. Lutovac and V. Pavlović , Efficient multirate EMQF digital filters, Elektronika Ir Elektrotechnika 119 (2012) 39–44. Crossref, Web of Science, Google Scholar
14. M. Rocklin and A. R. Terrel , Symbolic statistics with SymPy, IEEE CS and American Institute of Physics 14 (2012) 88–93. Google Scholar
15. L. Wanhammar , Analog Filters Using MATLAB (Springer, London, 2009), p. 287. Crossref, Google Scholar
16. M. Lutovac-Banduka , Remote monitoring and control of industrial robot based on android device and wi-fi communication, Automatika 56 (2015) 281–291. Crossref, Web of Science, Google Scholar
17. M. D. Lutovac and M. Lutovac-Banduka , GUI for Drawing Electrical Engineering Schematics in Free and Open Source Software, Proc. 3rd Int. Conf. Electrical, Electronic and Computing Engineering (Zlatibor, Serbia, 2016), pp. EKI1.3:1-4. Google Scholar
18. M. D. Lutovac, V. Mladenovic and M. Lutovac-Banduka , Graphical User Interface for Electrical Engineering Systems using Wolfram Language, Proc. 24th Telecommunication Forum, (Belgrade, Serbia, 2016), pp. 909–912. Crossref, Google Scholar
19. M. D. Lutovac, V. Mladenovic, M. Lutovac-Banduka , Integration of Software SchematicSolver into Mathematica Environment, Proc. 4th Int. Conf. Electrical, Electronic and Computing Engineering (Kladovo, Serbia, 2017), pp. EKI1.3:1-4. Google Scholar
20. M. D. Lutovac, M. Lutovac-Banduka and A. Pavlovic , Analysis, design, validation, and reporting of continuous-time systems using CAS, Proc. 6th Int. Conf. Electrical, Electronic and Computing Engineering (Silver Lake, Serbia, 2019), pp. 366–370. Google Scholar