Bridge Evaluation Based on Identified Influence Lines and Influence Surfaces: Multiple-Scenario Application
Abstract
Bridge influence lines (BILs) and bridge influence surfaces (BISs) are inherent static parameters of bridges which can be extracted from moving vehicle-induced bridge responses. Compared with dynamic parameters, these parameters are directly related to the stiffness and internal forces in each cross-section of a bridge therefore can be considered as an effective bridge metamodel. To accelerate the engineering practice of BIL- and BIS-based bridge evaluation, this paper first briefly reviews the current BIL and BIS field test and identification methods. Then, the bridge evaluation guidelines of China and the United States are introduced as the basis of the evaluation methods. Engineering application scenarios for bridge evaluation, including permit load verification, performance degradation checking, and load carrying capacity evaluation, are summarized, and a multiple-scenario bridge evaluation method is established. At the end of this paper, an evaluation example of a four-span continuous bridge is presented to illustrate the application procedure and verify the effectiveness of the proposed method. The outcomes of this paper provide a promising application method of field test BILs and BISs, which may help bridge engineers more effectively use these parameters in engineering practice.
| Remember to check out the Most Cited Articles! |
|---|
|
Remember to check out the structures |
