Research ArticleNo Access

Active Vibration Control of Truncated Conical Porous Smart Composite Shells

Farzad Ebrahimi

https://orcid.org/0000-0001-9091-4647

Department of Mechanical Engineering, Faculty of Engineering, Imam Khomeini International University, Qazvin, Iran

E-mail Address: febrahimy@eng.ikiu.ac.ir

Corresponding author.

Search for more papers by this author

Ali Mollazeinal

Department of Mechanical Engineering, Faculty of Engineering, Imam Khomeini International University, Qazvin, Iran

Search for more papers by this author

, and

Mehrdad Farajzadeh Ahari

https://orcid.org/0000-0002-3632-2226

Department of Mechanical Engineering, Faculty of Engineering, Imam Khomeini International University, Qazvin, Iran

Search for more papers by this author

https://doi.org/10.1142/S0219455424501323Cited by:9 (Source: Crossref)

Abstract

The current investigation examines the vibrational properties of porous truncated conical structures made from a composite material consisting of polyvinylidene fluoride (PVDF) reinforced with Terfenol-D particles. The effective properties of the magneto-electro-elastic composite were determined using the Eshelby–Mori–Tanaka model. The governing equation of the system is obtained by applying the principles of minimal potential energy and Hamilton’s principle to the first-order shear deformation theory. The equations are solved utilizing the generalized differential quadrature technique. This study aims to examine the interconnections among the volume percentage, vertex angle, shell length, boundary conditions, and porosity of Terfenol-D. Moreover, to validate the results, a comprehensive analysis was performed by comparing them with the existing body of literature, resulting in a favorable and accurate agreement. The results demonstrate a consistent decrease in the linear natural frequency as the vertex angle gradually increases. The findings derived from this study have the potential to serve as a reference point for future analyses.

Keywords:

Remember to check out the Most Cited Articles!
Remember to check out the structures

References

1. A. Sofiyev , The non-linear vibration of FGM truncated conical shells, Compos. Struct. 94(7) (2012) 2237–2245. Crossref, Web of Science, Google Scholar
2. M. Akbari et al., Free vibration of FGM Lévy conical panels, Compos. Struct. 116 (2014) 732–746. Crossref, Google Scholar
3. S. Khorshidi, S. Chakouvari, H. Askari and L. Cveticanin , Free Vibrations of flexoelectric FGM conical nanoshells with piezoelectric layers: Modeling and analysis, Energies 15(9) (2022) 2973. Crossref, Web of Science, Google Scholar
4. A. Houshangi, A. A. Jafari, S. E. Haghighi and M. Nezami , Supersonic flutter characteristics of truncated sandwich conical shells with MR core, Thin-Walled Struct. 173 (2022) 108888. Crossref, Google Scholar
5. A. Houshangi, S. E. Haghighi, A. A. Jafari and M. Nezami , Free damped vibration analysis of a truncated sandwich conical shell with a magnetorheological elastomer core, Waves Random Complex Media 33 (2022) 1–28. Crossref, Google Scholar
6. S. Yang, Y. Hao, W. Zhang, L. Yang and L. Liu , Nonlinear vibration of functionally graded graphene platelet-reinforced composite truncated conical shell using first-order shear deformation theory, Appl. Math. Mech. 42(7) (2021) 981–998. Crossref, Web of Science, Google Scholar
7. M. Gheisari, A. Nezamabadi, M. M. Najafzadeh, S. Jafari and P. Yousefi , Functionally graded porous conical nanoshell buckling during axial compression using MCST and FSDT theories by DQ method, Exp. Techniques 47(1) (2023) 313–326. Crossref, Google Scholar
8. M. F. Ahari and M. Ghadiri , Resonator vibration of a magneto-electro-elastic nano-plate integrated with FGM layer subjected to the nano mass-spring-damper system and a moving load, Waves Random Complex Media 33 (2022) 1–39. Crossref, Google Scholar
9. X. Zhao and K. M. Liew , Free vibration analysis of functionally graded conical shell panels by a meshless method, Compos. Struct. 93(2) (2011) 649–664. Crossref, Web of Science, Google Scholar
10. A. R. Damercheloo, A. R. Khorshidvand, S. M. Khorsandijou and M. Jabbari , Free vibrational characteristics of GNP-reinforced joined conical–conical shells with different boundary conditions, Thin-Walled Struct. 169 (2021) 108287. Crossref, Web of Science, Google Scholar
11. J. Zhao, K. Choe, C. Shuai, A. Wang and Q. Wang , Free vibration analysis of functionally graded carbon nanotube reinforced composite truncated conical panels with general boundary conditions, Compos. B: Eng. 160 (2019) 225–240. Crossref, Web of Science, Google Scholar
12. P. van Vinh, N. van Chinh and A. Tounsi , Static bending and buckling analysis of bi-directional functionally graded porous plates using an improved first-order shear deformation theory and FEM, Eur. J. Mech.-A/ Solids 96 (2022) 104743. Crossref, Web of Science, Google Scholar
13. T. H. Bekkaye, B. Fahsi, A. A. Bousahla, F. Bourada, A. Tounsi, K. H. Benrahou, A. Tounsi and M. M. Al-Zahrani , Porosity-dependent mechanical behaviors of FG plate using refined trigonometric shear deformation theory, Comput. Concr. Int. J. 26(5) (2020) 439–450. Web of Science, Google Scholar
14. T. Cuong-Le, K. D. Nguyen, H. Le-Minh, P. Phan-Vu, P. Nguyen-Trong and A. Tounsi , Nonlinear bending analysis of porous sigmoid FGM nanoplate via IGA and nonlocal strain gradient theory, Adv. Nano Res. 12(5) (2022) 441. Web of Science, Google Scholar
15. V. Katiyar, A. Gupta and A. Tounsi , Microstructural/geometric imperfection sensitivity on the vibration response of geometrically discontinuous bi-directional functionally graded plates (2D FGPs) with partial supports by using FEM, Steel Compos. Struct. Int. J. 45(5) (2022) 621–640. Google Scholar
16. H. Bellifa, A. Chikh, A. A. Bousahla, F. Bourada, A. Tounsi, K. H. Benrahou, M. Al-Zahrani and A. Tounsi , Influence of porosity on thermal buckling behavior of functionally graded beams, Smart Struct. Syst. 27(4) (2021) 719–728. Web of Science, Google Scholar
17. A. Mesbah, Z. Belabed, K. Amara, A. Tounsi, A. A. Bousahla and F. Bourada , Formulation and evaluation a finite element model for free vibration and buckling behaviours of functionally graded porous (FGP) beams, Struct. Eng. Mech. 86(3) (2023) 291. Google Scholar
18. G. Liu, S. Wu, D. Shahsavari, B. Karami and A. Tounsi , Dynamics of imperfect inhomogeneous nanoplate with exponentially-varying properties resting on viscoelastic foundation, Eur. J. Mech.-A/Solids 95 (2022) 104649. Crossref, Web of Science, Google Scholar
19. M. Hadji, A. Bouhadra, B. Mamen, A. Menasria, A. A. Bousahla, F. Bourada, M. Bourada, K. H. Benrahou and A. Tounsi , Combined influence of porosity and elastic foundation parameters on the bending behavior of advanced sandwich structures, Steel Compos. Struct. 46(1) (2023) 1. Web of Science, Google Scholar
20. Y. Kumar, A. Gupta and A. Tounsi , Size-dependent vibration response of porous graded nanostructure with FEM and nonlocal continuum model, Adv. Nano Res. 11(1) (2021) 001. Web of Science, Google Scholar
21. M. A. Al-Osta, H. Saidi, A. Tounsi, S. U. Al-Dulaijan, M. M. Al-Zahrani, A. Sharif and A. Tounsi , Influence of porosity on the hygro-thermo-mechanical bending response of an AFG ceramic-metal plates using an integral plate model, Smart Struct. Syst. Int. J. 28(4) (2021) 499–513. Web of Science, Google Scholar
22. J. Fan, J. Huang, J. Ding and J. Zhang , Free vibration of functionally graded carbon nanotube-reinforced conical panels integrated with piezoelectric layers subjected to elastically restrained boundary conditions, Adv. Mech. Eng. 9(7) (2017) 1687814017711811. Crossref, Google Scholar
23. S. Mohammadrezazadeh and A. A. Jafari , Vibration control of laminated truncated conical shell via magnetostrictive layers, Mech. Adv. Mater. Struct. 27(20) (2020) 1756–1764. Crossref, Web of Science, Google Scholar
24. H. Afshari , Free vibration analysis of GNP-reinforced truncated conical shells with different boundary conditions, Aust. J. Mech. Eng. 20(5) (2022) 1363–1378. Crossref, Web of Science, Google Scholar
25. M. Safarpour, A. Rahimi and A. Alibeigloo , Static and free vibration analysis of graphene platelets reinforced composite truncated conical shell, cylindrical shell, and annular plate using theory of elasticity and DQM, Mech. Based Des. Struct. Mach. 48(4) (2020) 496–524. Crossref, Web of Science, Google Scholar
26. S. Mohammadrezazadeh and A. A. Jafari , Vibration suppression of truncated conical shells embedded with magnetostrictive layers based on first order shear deformation theory, J. Theor. Appl. Mech. 57 (2019) 957–972. Crossref, Google Scholar
27. Z. Ebrahimi , Free vibration and stability analysis of a functionally graded cylindrical shell embedded in piezoelectric layers conveying fluid flow, J. Vib. Control 29 (2022) 11–12. Google Scholar
28. M. H. Hajmohammad, M. S. Zarei, A. Farrokhian and R. Kolahchi , A layerwise theory for buckling analysis of truncated conical shells reinforced by CNTs and carbon fibers integrated with piezoelectric layers in hygrothermal environment, Adv. Nano Res. 6(4) (2018) 299. Web of Science, Google Scholar
29. F. Ebrahimi and A. Dabbagh , Thermo-magnetic field effects on the wave propagation behavior of smart magnetostrictive sandwich nanoplates, Eur. Phys. J. Plus 133 (2018) 1–12. Crossref, Web of Science, Google Scholar
30. A. M. Zenkour and H. D. El-Shahrany , Hygrothermal vibration of adaptive composite magnetostrictive laminates supported by elastic substrate medium, Eur. Mech-A/Solids 85 (2021) 104140. Crossref, Web of Science, Google Scholar
31. A. Sofiyev , Application of the first order shear deformation theory to the solution of free vibration problem for laminated conical shells, Composite Struct. 188 (2018) 340–346. Crossref, Web of Science, Google Scholar
32. M. Mehri, H. Asadi and Q. Wang , Buckling and vibration analysis of a pressurized CNT reinforced functionally graded truncated conical shell under an axial compression using HDQ method, Comput. Methods Appl. Mech. Eng. 303 (2016) 75–100. Crossref, Web of Science, Google Scholar
33. N. Jooybar, P. Malekzadeh, A. Fiouz and M. Vaghefi , Thermal effect on free vibration of functionally graded truncated conical shell panels, Thin-Walled Struct. 103 (2016) 45–61. Crossref, Web of Science, Google Scholar
34. F. Ebrahimi and M. F. Ahari , Magnetostriction-assisted active control of the multi-layered nanoplates: Effect of the porous functionally graded facesheets on the system’s behavior, Eng. Comput. 39 (2021) 1–15. Web of Science, Google Scholar
35. Y. W. Zhang, H. X. Ding, G. L. She and A. Tounsi , Wave propagation of CNTRC beams resting on elastic foundation based on various higher-order beam theories, Geomech. Eng. 33(4) (2023) 381. Web of Science, Google Scholar
36. A. S. Mangalasseri, V. Mahesh, S. Mukunda, S. A. Ponnusami, D. Harursampath and A. Tounsi , Vibration based energy harvesting performance of magnetoelectro-elastic beams reinforced with carbon nanotubes, Adv. Nano Res. 14(1) (2023) 27–43. Google Scholar
37. Y. Huang, B. Karami, D. Shahsavari and A. Tounsi , Static stability analysis of carbon nanotube reinforced polymeric composite doubly curved micro-shell panels, Arch. Civ. Mech. Eng. 21(4) (2021) 1–15. Crossref, Web of Science, Google Scholar
38. E. Arshid, M. Khorasani, Z. Soleimani-Javid, S. Amir and A. Tounsi , Porosity-dependent vibration analysis of FG microplates embedded by polymeric nanocomposite patches considering hygrothermal effect via an innovative plate theory, Eng. Comput. 38 (2021) 1–22. Google Scholar
39. F. Heidari, K. Taheri, M. Sheybani, M. Janghorban and A. Tounsi , On the mechanics of nanocomposites reinforced by wavy/defected/aggregated nanotubes, Steel Compos. Struct. Int. J. 38(5) (2021) 533–545. Web of Science, Google Scholar
40. A. Garg, P. Aggarwal, Y. Aggarwal, M. O. Belarbi, H. D. Chalak, A. Tounsi and R. Gulia , Machine learning models for predicting the compressive strength of concrete containing nano silica, Comput. Concrete 30(1) (2022) 33. Web of Science, Google Scholar
41. L. Xia, R. Wang, G. Chen, K. Asemi and A. Tounsi , The finite element method for dynamics of FG porous truncated conical panels reinforced with graphene platelets based on the 3-D elasticity, Adv. Nano Res. 14(4) (2023) 375–389. Web of Science, Google Scholar
42. Y. Onuralp, E. Madenci, Ö. Yasin, O. Özkılıç, A. Hakamy, A. Hakamy and A. Tounsi , Experimental tensile test and micro mechanic investigation on carbon nanotube reinforced carbon fiber composite beams, Adv. Nano Res. 14 (2023) 443–450. Google Scholar
43. F. Ebrahimi and S. Habibi , Nonlinear eccentric low-velocity impact response of a polymer-carbon nanotube-fiber multiscale nanocomposite plate resting on elastic foundations in hygrothermal environments, Mech. Adv. Mater. Struct. 25(5) (2018) 425–438. Crossref, Web of Science, Google Scholar
44. Y. Q. Wang and H. L. Zhao , Free vibration analysis of metal foam core sandwich beams on elastic foundation using Chebyshev collocation method, Archive of Appl. Mech. 89 (2019) 2335–2349. Crossref, Web of Science, Google Scholar
45. Q. Wang, D. Shao and B. Qin , A simple first-order shear deformation shell theory for vibration analysis of composite laminated open cylindrical shells with general boundary conditions, Compos. Struct. 184 (2018) 211–232. Crossref, Web of Science, Google Scholar
46. J. N. Reddy , Energy Principles and Variational Methods in Applied Mechanics (John Wiley & Sons, 2017). Google Scholar
47. F. Ebrahimi, M.-S. Shafiee and M. F. Ahari , Buckling analysis of single and double-layer annular graphene sheets in thermal environment, Eng. Comput. 39 (2022) 1–15. Web of Science, Google Scholar
48. F. Ebrahimi, M.-S. Shafiei and M. F. Ahari , Vibration analysis of single and multi-walled circular graphene sheets in thermal environment using GDQM, Waves Random Complex Media 33 (2022) 1–40. Web of Science, Google Scholar
49. Y. Rahimi, M. Ghadiri, A. Rajabpour and M. Farajzadeh Ahari , Temperature-dependent vibrational behavior of bilayer doubly curved micro-nano liposome shell: Simulation of drug delivery mechanism, J. Therm. Stress. 46 (2023) 1–28. Crossref, Google Scholar
50. Z. K. Mizuji, M. Ghadiri, A. Rajabpour, M. F. Ahari, A. Zajkani and S. Yazdinia , Numerical modeling of a body vessel for dynamic study of a nano cylindrical shell carrying fluid and a moving nanoparticle, Eng. Anal. Bound. Elem. 152 (2023) 362–382. Crossref, Web of Science, Google Scholar
51. N. Jalili , Piezoelectric-based Vibration Control: From Macro to Micro/Nano Scale Systems (Springer Science & Business Media, New York City, 2009). Google Scholar
52. R. Asrari, F. Ebrahimi, M. M. Kheirikhah and K. H. Safari , Buckling analysis of heterogeneous magneto-electro-thermo-elastic cylindrical nanoshells based on nonlocal strain gradient elasticity theory, Mech. Des. Struct. Mach. 50(3) (2020) 1–24. Web of Science, Google Scholar