Correlation between microstructure and corrosion resistance of amorphous Ni–W–P coatings after low-temperature heat treatment
Abstract
Amorphous Ni–W–P coatings were prepared by electroless plating and annealed at 250∘C for different times to obtain different microstructures. The local atomic structure of these amorphous coatings was analyzed by calculating the atomic pair distribution function from the XRD patterns. The type of crystals in coatings was obtained from the TEM image and corresponding selected area diffraction (SAED) pattern. The proportion of microscopic particles in the matrix was roughly estimated from the first DSC exothermic peak area. Corrosion resistance in 0.5-M sulfuric acid solution was investigated via electrochemical techniques. Experimental results showed that all annealed coatings still held amorphous structure, albeit the microstructure had been changed. The correlation radius and the atomic number of clusters had increased, especially when the annealed time extended to 12 h and 20 h. The number of microscopic particles in the amorphous matrix also increased with rise in heat treatment time. The type of crystals in these amorphous matrices increased from Ni/Ni (W) to Ni/Ni (W), Ni12P5 and Ni5P4. The decreasing corrosion resistance was in agreement with the increasing number of microscopic particles and higher-order clusters in annealed Ni–W–P coatings. These microscopic particles could form micro-galvanic cells in corrosion solution. The higher-order clusters increased the composition difference in the amorphous matrix, and this also promoted to form micro-galvanic cells in solution.
| You currently do not have access to the full text article. |
|---|
