World Scientific
Skip main navigation

Cookies Notification

We use cookies on this site to enhance your user experience. By continuing to browse the site, you consent to the use of our cookies. Learn More
×

System Upgrade on Tue, May 28th, 2024 at 2am (EDT)

Existing users will be able to log into the site and access content. However, E-commerce and registration of new users may not be available for up to 12 hours.
For online purchase, please visit us again. Contact us at customercare@wspc.com for any enquiries.

MICROSTRUCTURE AND PROPERTIES OF LASER CLADDED TiNiCoCrVSi HIGH ENTROPY ALLOY COATING

    https://doi.org/10.1142/S0218625X24500100Cited by:0 (Source: Crossref)

    A TiNiCoCrVSi high entropy alloy (HEA) coating was prepared on Ti–6Al–4V alloy by laser cladding. Then, the microstructure, phase composition, hardness, wear resistance and high-temperature oxidation resistance of the prepared coatings were investigated. The wear behavior of the TiNiCoCrVSi coating against a Si3N4 ball was evaluated under dry sliding conditions. The high-temperature oxidation resistance was tested at 800C. The results show that the phase structure of the TiNiCoCrVSi coating was mainly composed of a body-centered cubic (BCC) (Ni,Co)Ti2 and (Ti,V)5Si3. The TiNiCoCrVSi coating has a high hardness, and the highest surface hardness was 1357 HV. The wear volume of the coating was 1/7 of that of Ti–6Al–4V. The wear mechanism was abrasive wear and oxidative wear. The TiNiCoCrVSi coating exhibited good high-temperature oxidation resistance at 800C. A dense oxide film (TiO2, Cr2O3 and NiCr2O4) was formed on the surface of the coating. The dense oxide film prevented oxidation. The high-temperature oxidation resistance of the coating was 1/12 of that of the substrate.