Narrow Results

Cube-shaped CdS nanoparticles have been successfully prepared by a sonochemical method in an oil-in-water microemulsion. The product was characterized by using techniques including X-ray powder diffraction, high-resolution transmission electron microscopy, energy-dispersive X-ray analysis and UV-visible absorption spectroscopy. This microemulsion system in the presence of high-intensity ultrasound irradiation provides special conditions for the nucleation and growth of the CdS nanoparticles.

Materials such as CdS and CdSe inorganic nanoparticles have photoluminescence. Sodium oleate has been used as effective stabilizers for the synthesis of CdS and CdSe nanoparticles in water by autoclave method. Photoluminescence of CdS and CdSe with particle size of 5–14 nm showed λ_max at 520 nm and 600 nm, respectively, when were excited at 365 nm. These nanoparticles doped into the PVA resulted in the organic/inorganic films (PVA/CdS, CdSe). Photoluminescence, X-ray diffraction and transmission electron microscopy were employed for their characterization.

Cadmium sulfide nanoparticles were synthesized and grown on glass substrates by chemical bath deposition. The method involves the preparation of aqueous solutions containing cadmium chloride (CdCl₂) and thiourea [CS(NH₂)₂] as source materials for cadmium and sulfur components, respectively. Ammonium hydroxide (NH₄OH)–ammonium chloride (NH₄Cl) solution was used as a complexing agent in this study. The hexagonal and cubic crystal structure of as-deposited CdS films, determined by X-ray diffraction (XRD), is shown. The effects of Cd:S ratio variation on the surface morphology and optical properties of CdS films are also reported. The UV-vis transmission spectrum and SEM micrographs indicated that the Cd:S ratio in the aqueous solution had an impact on the band gap as well as the crystallite size and packing density of the CdS particles due to the quantum confinement effect.

Cadmium sulfide nanoparticles have been synthesized by hydrothermal method using cadmium acetate, thiosemicarbazide, and sodium hydroxide as precursors with hexamethylene tetramine as the surfactant. From the X-ray diffraction analysis, it is observed that synthesized CdS nanoparticles show cubic phase. The presence of HMTA in CdS was confirmed by FT-IR analysis. The bandgap value of CdS nanostructure has been estimated by DRS–UV-Visible spectral analysis. The formation of flower-like nanoclusters was observed using scanning electron microscopy (SEM). The application of CdS nanoparticles in photocatalytic degradation was also studied.

Fluorescent semiconductor nanocrystals have been widely used as fluorescent materials in chemical sensors, biotechnology, medical diagnostics, biological imaging and many other fields. Compared to the conventional organic fluorophores, the inorganic quantum dots (QDs) have many advantages, including broad absorption spectra, narrow emission spectra, good photostability and long fluorescent lifetime after excitation. Here, the high quality CdS QDs were synthesized directly from sulfur and CdO using the paraffin liquid as solvent and the oleic acid as the reacting media. The synthesized CdS QDs with a zinc blende (cubic) crystal structure were proved by X-ray diffraction. HRTEM observation revealed that the CdS QDs were uniform and the average grain size was about 4 nm. The optical properties of the CdS QDs were characterized by using photoluminescence (PL) spectrophotometer and Ultraviolet-visible (UV-Vis) absorption spectrophotometer. The formation mechanism of CdS QDs in the paraffin liquid and oleic acid system was proposed.

In the present work, Cadmium sulfide (CdS) and CdS doped with copper (Cu) and iron (Fe) metals thin films were deposited on glass slides using chemical bath deposition technique. 1% content of Cu and Fe were used as dopants. The films were prepared at a reaction temperature of approximately 80^∘C and for an hour as the reaction time without any heat treatment. The pure and doped films were diagnosed and examined by several techniques such as X-ray diffraction (XRD), field emission scanning electron microscope (FESEM) and UV-visible spectrometry to study the effect of the doping and the type of dopant material on the surface, structural and optical properties of CdS films. From the results of XRD can be noticed there is no effect for the dopant on the type of crystal structure except small shifting in the position of main peak after doping. The bandgap energy of the Fe-doped CdS films has been found to be lower than that of the undoped films between 2.62 eV and 2.43 eV.