Multiscale Modelling and SimulationNo Access

TOOL STRESS PATTERN DEPENDING ON TOOL GEOMETRY

School of Mechanical Engineering, Kyungpook National University, 1370 Sankyuk-Dong, Puk-Ku, Daegu, 702-701, Korea

School of Biosystems Engineering, Pusan National University, 50 Cheonghak Ri, Samnangjin Eup, Miryang, Gyeongsangnam-Do, 627-706, Korea

Search for more papers by this author

JAE HWAN SON

Daegu Machinery Institute of Component & Materials Foundation, 12 Horim-Dong, Dalseo-Ku, Daegu, 704-240, Korea

Search for more papers by this author

SUN IL KIM

Graduate School of Mechanical Engineering, Kyungpook National University, 1370 Sankyuk-Dong, Puk-Ku, Daegu, 702-701, Korea

Search for more papers by this author

, and

HEE CHUL JUNG

Graduate School of Mechanical Engineering, Kyungpook National University, 1370 Sankyuk-Dong, Puk-Ku, Daegu, 702-701, Korea

Search for more papers by this author

https://doi.org/10.1142/S0217979210065647Cited by:0 (Source: Crossref)

Abstract

In metal cutting practices, for a given tool material, tool geometry is a very important element and must be carefully designed in relation to the workpiece material to be machined. Patterns of tool stress are varying with input cutting conditions; however, effects of tool geometry on tool stress are not clearly understood. The load distribution on tool face is affected by the tool geometry and this causes the change of the stress distribution on the tool.

Keywords: