SPECIAL ISSUE: Advanced Materials and Their Processing TechnologyNo Access

Analysis of thin strip profile by work roll crossing and shifting in asymmetrical cold rolling

Abdulrahman Aljabri

School of Mechanical, Materials and Mechatronic Engineering, University of Wollongong, Wollongong NSW 2522, Australia

Search for more papers by this author

Zhengyi Jiang

School of Mechanical, Materials and Mechatronic Engineering, University of Wollongong, Wollongong NSW 2522, Australia

Corresponding author.

Search for more papers by this author

, and

Dongbin Wei

School of Electrical, Mechanical and Mechatronic Systems, University of Technology Sydney, Sydney NSW 2001, Australia

Search for more papers by this author

https://doi.org/10.1142/S0217979215400329Cited by:6 (Source: Crossref)

Abstract

In order to analyze the effects of cold rolling parameters such as the crossing angle and axial shifting value of work rolls on the strip profile, extensive tests were carried out on a 4-high rolling mill equipped with a work roll crossing and shifting system. The results show that the strip profile is nearly flat under asymmetrical rolling. The rolling force was also analyzed in detail by changing the crossing angle and axial shifting value of work rolls.

Keywords:

You currently do not have access to the full text article.
Recommend the journal to your library today!

References

A. S. Malik and R. V. Grandhi, Flat-Rolled Steel Processes Advanced Technologies, ed. V. B. Ginzburg (CRC Press, New York, USA, 2009) pp. 329–339. Crossref, Google Scholar
N. Kiyoshi et al., High Reduction Rolling Technology on Pair Cross Mill, Nippon Steel Technology Report No. 75 (1997), pp. 9–23 . Google Scholar
V. B. Ginzburg and M. Azzam , Iron Steel Eng. 74 , 30 ( 1997 ) . Google Scholar
V. B. Ginzburg, Roll Crossing and Shifting System, Danieli United, A Division of Danieli Corporation; International Rolling Mill Consultants, USA, 1997), pp. 1–18 . Google Scholar
Y. Miyai , R. Shimizu and T. Kawasaki , Iron and Steel Eng. 35 ( 1991 ) . Google Scholar
Y. Qiulin and F. Kuan-Chen, Method for Controlling Axial Shifting Rolls (The University of Toledo, Cananda, 1995) pp. 1–17. Google Scholar
Z. Y. Jiang et al. , Adv. Mater. Res. 81 , 97 ( 2010 ) . Web of Science, Google Scholar
Z. Y. Jiang , D. B. Wei and A. K. Tieu , J. Mater. Process. Technol. 209 , 4584 ( 2009 ) . Crossref, Web of Science, Google Scholar
Z. Y. Jiang , H. T. Zhu and A. K. Tieu , Key Eng. Mater. 715 , 274 ( 2004 ) . Google Scholar
S. Omori et al. , Ironmak. Steelmak. 31 , 71 ( 2004 ) . Crossref, Web of Science, Google Scholar
M. Kitahama et al. , Iron Steel Eng. 34 ( 1987 ) . Google Scholar
A. Aljabri et al. , Mater. Sci. Forum 70 , 773 ( 2013 ) . Google Scholar
A. Aljabri et al., Modeling of Thin Strip Profile during Cold Rolling on Roll Crossing and Shifting Mill, in PRICM: 8 Pacific Rim International Congress on Advanced Materials and Processing, Waikoloa, Hawaii, USA (John Wiley & Sons, 2013) . Google Scholar