PapersNo Access

RESEARCH ON THE GALLOPING AND ANTI-GALLOPING OF THE TRANSMISSION LINE

ZHAOHONG QIN

Beijing Institute of Structure and Environment Engineering, Beijing, P. R. China

School of Astronautics, Harbin Institute of Technology, Harbin, P. R. China

Search for more papers by this author

YUSHU CHEN

School of Astronautics, Harbin Institute of Technology, Harbin, P. R. China

School of Mechanical Engineering, Tianjin University, Tianjin, P. R. China

Search for more papers by this author

XUEPING ZHAN

Electric Power Construction Research Institute, State Power Corporate, Beijing, P. R. China

Search for more papers by this author

BIN LIU

Electric Power Construction Research Institute, State Power Corporate, Beijing, P. R. China

Search for more papers by this author

, and

KUANJUN ZHU

Electric Power Construction Research Institute, State Power Corporate, Beijing, P. R. China

Search for more papers by this author

https://doi.org/10.1142/S0218127412500381Cited by:18 (Source: Crossref)

Abstract

In this paper the models of the transmission line with one DOF, two DOFs and three DOFs are constructed respectively by using Hamilton principle, where the initial location, the geometric nonlinearity caused by deformation and the aerodynamic nonlinearity caused by flow are considered. These simple models are accurate and can be used for the theoretical analysis. In actual engineering, the critical wind speed of galloping has been paid more and more attention. Therefore, in this paper the critical wind speeds are obtained by Lyapunov stability theory and the effects of structural parameters to the critical wind speed are discussed for different models. And the response curves of the system with one DOF and two DOFs (out-of-plane motion) are obtained by using harmonic balance method and multiple scale method, respectively. The bifurcation of the system moving out-of-plane is analyzed by singularity theory. For the systems whose motion is coupled with torsion, the numerical results are given by using the fourth order Runge–Kutta method. Additionally, the effects of the dynamic vibration absorber and detuning pendulum to the anti-galloping of the transmission line are studied for different cases.

Keywords:

References

Y. M. Desaiet al., J. Sound Vib. 4, 469 (1996). Google Scholar
Guo, Y. L., Li, G. X. & You, C. Y. [2003] Galloping of the Transmission Line (China Electr. Power Press), pp. 1–15 . Google Scholar
Z. He and G. Y. Zhao, Eng. Mech. 2, 126 (2001). Web of Science, Google Scholar
X. J. Heet al., J. Vib. Shock. 6, 41 (2008). Web of Science, Google Scholar
J. C. Huet al., Model for comprehensive simulation of overhead high voltage power transmission line galloping and protection, IEEE Conf. Electrical Insulation and Dielectric Phenomena (2006) pp. 190–193. Google Scholar
D. S. Hu, S. Yuan and W. Q. Tao, Northeast Electr. Power Technol. 3, 13 (2009). Web of Science, Google Scholar
H. G. M. John and L. L. Guy, J. Wind Eng. Ind. Aerodyn. 3, 291 (2008). Google Scholar
H. G. M. John and L. L. Guy, J. Wind Eng. Ind. Aerodyn. 3, 308 (2008). Google Scholar
M. I. Kazakevich and A. G. Vasilenko, J. Wind Eng. Ind. Aerodyn. 1, 353 (1996). Web of Science, Google Scholar
C. L. Lee and N. C. Perkins, Nonlin. Dyn. 3, 465 (1992). Crossref, Google Scholar
C. L. Leiet al., High Voltage Eng. 10, 178 (2007). Google Scholar
A. Luongo, G. Rega and F. Vestroni, Int. J. Non Lin. Mech. 1, 39 (1984). Web of Science, Google Scholar
A. Luongo and G. Piccardo, J. Sound Vib. 5, 915 (1998). Google Scholar
A. Luongo, D. Zulli and G. Piccardo, J. Mech. Mater Struct. 4, 675 (2007). Web of Science, Google Scholar
A. Luongo, D. Zulli and G. Piccardo, Comput. Struct. 87, 1003 (2009), DOI: 10.1016/j.compstruc.2008.04.014. Crossref, Web of Science, Google Scholar
J. G. Ma, T. Jin and Z. Y. Tan, Power Syst. Technol. 4, 81 (2002). Web of Science, Google Scholar
K. G. McConnel and C. N. Chang, Exp. Mech. 2, 324 (1986). Google Scholar
O. Nigol and P. G. Buchan, IEEE Trans. Power Apparat. Syst. 2, 699 (1981). Web of Science, Google Scholar
O. Nigol and P. G. Buchan, IEEE Trans. Power Apparat. Syst. 2, 708 (1981). Google Scholar
Z. H. Qin and Y. S. Chen, Acta Mech. Sin. 3, 501 (2010). Web of Science, Google Scholar
J. W. Wang, L. Li and J.-L. , IEEE Trans. Power Deliv. 3, 909 (1998). Google Scholar
K. S. Wang and G. J. Tang, J. Vib. Shock 2, 69 (2003). Web of Science, Google Scholar
S. H. Wang, X. L. Jiang and C. X. Sun, High Voltage Eng. 10, 11 (2005). Web of Science, Google Scholar
W. N. Whiteet al., Appl. Mech. Div. 2, 224 (1991). Google Scholar
X. H. Xiao, Y. L. Guo and J. Wu, Electr. Power Constr. 6, 25 (1998). Web of Science, Google Scholar
Z. G. Yang, Jilin Electr. Power 5, 17 (2008). Crossref, Web of Science, Google Scholar
P. Yu, A. H. Shah and N. Popplewell, Trans. ASME 59, 140 (1992). Crossref, Web of Science, Google Scholar
P. Yuet al., J. Eng. Mech. ASCE 12, 2404 (1993). Google Scholar
P. Yu, N. Popplewell and A. H. Shah, J. Sound Vib. 4, 679 (1995). Google Scholar
M. Zhang and X. B. Chen, Hubei Electr. Power 1, 43 (2008). Google Scholar
Zhao, G. Y. [2005] "Galloping computation and analysis for long multi-span bundle conductors of power transmission," Doctor thesis, Huazhong Univ. Sci. Technol., pp. 56–78 . Google Scholar
K. J. Zhu, D. J. Fu and J. C. Wang, Electr. Equip. 6, 8 (2008). Web of Science, Google Scholar