Preparation of silver nanoparticles and application in water-based conductive inks
Abstract
We reported a simple, high yield and large-scale preparation method for silver nanoparticles. Silver nanoparticles with 8–13 nm in diameter were successfully synthesized by silver nitrate as raw material, sodium borohydride as reducing agent, dispersan-5040 (polycarboxylate sodium salt) as surface modifier in aqueous solution. The effects of sodium borohydride and dispersan-5040 on the morphologies of silver nanoparticles were investigated. Further, the conductive inks were prepared with as-synthesized silver nanoparticles as conductive fillers in the presence of deionized (DI) water and additives. The effects of conductive fillers and additives on the pH, conductivity, surface tension and viscosity of the inks were investigated. The conductive patterns were fabricated by inkjet printer and their performances were studied. The sheet resistances of the printed pattern with seven-layer was 1.2 Ω/□ when the printed pattern was heat-treated at 120∘C for 60 min. We succeeded in printing a simple conductive circuit on photographic paper, which can light three 0.06 W LED beads. The successful fabrication of the functional circuit proves the feasibility of the ink and provides some ideas for future paper-based circuits.
| You currently do not have access to the full text article. |
|---|
