Research ArticleFree Access

An analysis of regenerative braking and operation of induction motor employing novel dq-axis mathematical modeling with real time simulator and SIMULINK

Somnath Burman

https://orcid.org/0000-0002-0793-4258

Indian Institute of Technology (ISM), Dhanbad, 826004, Jharkhand, India

E-mail Address: sburman008@gmail.com

Search for more papers by this author

and

Tanmoy Maity

Indian Institute of Technology (ISM), Dhanbad, 826004, Jharkhand, India

E-mail Address: tanmoy1826@gmail.com

Corresponding author.

Search for more papers by this author

https://doi.org/10.1142/S1793962324500090Cited by:0 (Source: Crossref)

Abstract

This paper describes the novel mathematical modeling of the 3-phase induction motor, various operations and study of its dynamic behavior and regenerative braking based on the model. This model uses v/f scheme to apply braking operation with the energy flow to the supply system instead of wasting the energy in braking resistor. It discusses the theory of induction motors, which is explored through both equations and computer simulation model using SIMULINK. The model also helps to study the behavior of the motor during its starting and load variation. The results from the analysis prove the demonstration of regenerative braking and the dynamic behavior and can give an opportunity to learn the different characteristics during these conditions.

Keywords:

References

1. Rahane K., Hardas R., Induction motor braking using discrete frequency control, 2015 Int. Conf. Energy Systems and Applications, Pune, India, 2015, pp. 782–784, https://doi.org/10.1109/ICESA.2015.7503456. Crossref, Google Scholar
2. Murthy A. S., Magee D. P., Tayl D. G., Optimized regenerative braking of induction machines with indirect field-oriented control, Transportation Electrification Conf. and Expo (ITEC), IEEE, New York, 2016, pp. 1–6, https://doi.org/10.1109/ITEC.2016.7520292. Crossref, Google Scholar
3. Kundur P., Power System Stability and Control, 1st edn., Tata McGraw Hills, pp. 54–56, 2006. Google Scholar
4. Padiyar K. R., Power System Dynamics, 2nd edn., B. S. Publications, Hyderabad, pp. 48, 69, 2002. Google Scholar
5. Krons G., Equivalent Circuit of Electrical Machinery, 2nd edn., Addison-Wesley Publishing Company, 1951. Google Scholar
6. Bhimra P. S., Electrical Machinery, 5th edn., Khanna Publisher, p. 270, 2007. Google Scholar
7. Batool M., Ahmad A., Mathematical modeling and speed torque analysis of three phase squirrel cage induction motor using MATLAB simulink for electrical machines laboratory, Int. Electric. Eng. J. (IEEJ) 4 :880–889, 2013. Google Scholar
8. Louganski K. P., Lai J. S., A 20-kw, 10-khz, single-phase multilevel active-front-end converter with reactive power control, Proc. IEEE Industry Applications Society Annual Meeting (IAS 2006), Vol. 2, Tampa, Florida, IEEE, New York, pp. 576–582, 2006. Crossref, Google Scholar
9. Koellner W., A new all AC gearless drive system for large mining draglines, Proc. IEEE Industry Applications Society Annual Meeting (IAS 2006), Vol. 3, Tampa, Florida, IEEE, New York, pp. 1310–1314, 2006. Crossref, Google Scholar
10. Mazumdar J., Regeneration energy management in AC mining drives for providing control power, 2009 IEEE Industry Applications Society Annual Meeting, Houston, TX, IEEE, New York, pp. 1–5, 2009. Crossref, Google Scholar
11. Sasi D., Kuruvilla J. P., Modelling and simulation of SVPWM inverter fed permanent magnet brushless DC motor drive, Int. J. Adv. Res. Electric. Electron. Instrum. Eng. 2, 2013, pp. 1947–1955. Google Scholar