No Access

EXPERIMENTAL INVESTIGATION OF PERFORMANCE IMPROVEMENT OF HOUSEHOLD REFRIGERATOR USING PHASE CHANGE MATERIAL

MD. IMRAN HOSSEN KHAN

Mechanical Engineering Department, Dhaka University of Engineering & Technology, Gazipur, Gazipur-1700, Bangladesh

Search for more papers by this author

and

HASAN M. M. AFROZ

Mechanical Engineering Department, Dhaka University of Engineering & Technology, Gazipur, Gazipur-1700, Bangladesh

Search for more papers by this author

https://doi.org/10.1142/S2010132513500296Cited by:16 (Source: Crossref)

Abstract

An experimental investigation has been carried out to know about the performance improvement of a household refrigerator using phase change material (PCM). PCMs are used as latent heat thermal storage system to enhance the heat transfer of the evaporator. PCM is located behind the five sides of the evaporator cabinet in which the evaporator coil is immersed. Water (melting point 0°C) and Eutectic solutions (melting point −5°C) are used as PCMs for this experiment at different thermal loads. Depending on the types of PCM and thermal load, around 20–27% COP improvement of the refrigeration cycle has been observed with PCM with respect to without PCM. With the increase of the quantity of PCM (0.003 to 0.00425 m³) COP increases about 6%. Between two different PCMs the COP improvement for Eutectic solution is higher than Water. The experimental results with PCM confirm that, depending on the thermal load and the types of PCM average compressor running time per cycle is reduced significantly and it is found about 2–36% as compared to without PCM.

Keywords:

References

D. Y. Liu, W. R. Change and J. Y. Lin, Appl. Therm. Eng. 24, 2281 (2004), DOI: 10.1016/j.applthermaleng.2004.01.009. Crossref, Web of Science, Google Scholar
T. M. I. Mahliaet al., Energy 28, 751 (2003), DOI: 10.1016/S0360-5442(02)00190-1. Crossref, Web of Science, Google Scholar
F. Billiard, Bull. Int. Inst. Refrig. 85, 12 (2005). Google Scholar
G. Cerri , Identification of domestic refrigerator models including cool storage , Proc. 20th Int. Cong. Refrigeration ( 2003 ) . Google Scholar
E. Maltini et al. , Design and performances of a constant temperature compartment for domestic refrigerator , Int. Congress on Engineering and Food ( 2004 ) . Google Scholar
F. Wanget al., Appl. Therm. Eng. 27, 2902 (2007), DOI: 10.1016/j.applthermaleng.2005.06.009. Crossref, Web of Science, Google Scholar
K. Azzouz et al. , Improving the energy efficiency of avapor compression system using a phase change material , Proc. 2nd Conf. Phase Change Material & Slurry ( 2005 ) . Google Scholar
K. Azzouz, D. Leducq and D. Gobin, Int. J. Refrig. 31, 892 (2008), DOI: 10.1016/j.ijrefrig.2007.09.007. Crossref, Web of Science, Google Scholar
K. Azzouz, D. Leducq and D. Gobin, Int. J. Refrig. 32, 1634 (2009), DOI: 10.1016/j.ijrefrig.2009.03.012. Crossref, Web of Science, Google Scholar
E. W. Lemmon, M. L. Huber and M. O. McLinden, Reference fluid thermodynamic and transport properties, NIST standard reference database 23, Ver.8.0 (2007) . Google Scholar