Structural and electrical properties of zirconium doped yttrium oxide nanostructures
Abstract
A synthetic process for the formation of ZrxY1-xOy nanostructures is demonstrated by the reaction of yttrium nitrate hexahydrate with zirconium propoxide. The reactions are carried out at temperature 60°C and pressure 0.1 MPa. The energy dispersive X-ray (EDX) spectroscopy measurements confirm formation of ZrxY1-xOy nanostructures and the presence of carbonate and hydroxide species which are removed after high temperature anneals. It was found that the oxygen pressure during synthesis plays a determinant role on the structural properties of the nanostructure. This effect is further studied by atomic force microscopy (AFM) measurements and scanning electron microscope (SEM), which showed the formation of an isotopically organized structure. X-ray diffraction (XRD) measurement reveals that these changes in the nanostructural efficiency are associated with structural and compositional changes among the substrate. The dielectric constant as measured by the capacitance–voltage (C–V) technique is estimated to be around 39.05. C–V measurements taken at 1 MHz show the maximum capacitance for the Zr0.05Y0.95Oy film. The leakage current densities were below 10-5 A/cm2 for the Zr0.05Y0.95Oy film.
| You currently do not have access to the full text article. |
|---|
