Narrow Results

Veolia Water Solutions & Technologies receives two prizes at AquaTech China for AnoxKaldnes™ MBBR technology and its Carbon Footprint Reduction Program.

International Consortium Led by Chinese Scientists Announce the First Complete Sequencing of Pear Genome.

Eli Lilly Opens Diabetes Research Center in China.

China 'Soaring Ahead' in Nanotechnology Research.

Latest Genomic Studies Shed New Light on Maize Diversity and Evolution.

Insight Genetics and Kindstar Global Partner to Enhance Cancer Care in China.

Two studies from the Institute of Plant and Microbial Biology published in PNAS show how plants respond to changing environments.

China's Pharmaceuticals Sales Force Levels Surpass US for First Time.

MALAYSIA — Veolia expands presence in East Malaysia.

SINGAPORE — Syneron Dental Lasers signs distribution agreement with Healthcare Solutions & Services Pte Ltd.

SINGAPORE — Fujitsu advances healthcare innovation in collaboration with National University of Singapore.

SINGAPORE — Clearbridge BioMedics makes a big impact at the 2012 Asian Innovation Awards.

SINGAPORE — TauRx Pharmaceuticals receives $111.8m commitment from Genting to prepare for Market Leadership in Alzheimer's.

THAILAND — Key Phase II HIV/HCV trial has commenced in Bangkok.

AUSTRALIA — Hatchtech mechanism of action data and safety study published.

AUSTRALIA — Power to you: carbon nanotube muscles are going strong.

EUROPE — GE Healthcare Life Sciences opens new £3 million laboratories for cell science.

EUROPE — AstraZeneca announces Phase III results from naloxegol pivotal trials.

EUROPE — ACADIA's pimavanserin sees Phase III success.

EUROPE — Big Pharma is doing more for access to medicine in developing countries.

EUROPE — CAVATAK™ bladder cancer – positive preliminary data.

EUROPE — Avita Medical initiates European trial in the management of chronic lower limb ulcers.

NORTH AMERICA — FEI unveils broad correlative microscopy solution set for cell biologists.

NORTH AMERICA — A single dose of Medicago's H5N1 VLP vaccine protects against additional pandemic flu strains in a preclinical study.

NORTH AMERICA — Biologics and stem cell research boost the cell culture market.

Difference in rainfall between wet and dry seasons is increasing worldwide.

Rare carbon molecule detected in dying star gives glimpse of stellar evolution.

Whole genome sequencing of wild rice reveals the mechanisms underlying Oryza genome evolution.

BGI and TGAC join efforts to tackle global challenges in food security, energy and health.

A regeneration system for tartary buckwheat invented by CIB.

A new approach for the reduction of carbon dioxide to methane and acetic acid.

Launch of the Chinese-German Center for Bio-Inspired Materials at the Mainz University Medical Center.

Science: The early bird loses an ovary.

Disruptions of functional brain connectomes in individuals at risk for Alzheimer's disease.

A breakthrough in carbohydrate-based vaccine: One vaccine targets three unique glycan epitopes on cancer cells and cancer stem cells.

BSD Medical signs exclusive agreement for distribution of BSD's cancer treatment hyperthermia system in Taiwan.

Catalent announces major China expansion with two new facilities.

This paper reports the synthesis and characterization of ternary nanocomposites consisting of polyaniline (PANI), multiwalled carbon nanotubes (MWCNTs) and manganese dioxide (MnO₂) at different MWCNT–MnO₂ loadings. The composite electrical percolation threshold is investigated as well. The in situ nanocomposites were characterized by UV-visible, Fourier transform and Raman spectroscopy, thermogravimetric analysis, field emission scanning electron microscopy, and electrical conductivity measurements. The conductivity of the nanocomposite reached up to 78.79 Scm^-1 with 50 wt.% addition of MWCNT–MnO₂ with good conduction stability and reversibility. The percolation threshold of this nanocomposite was achieved at 0.5 wt.%. Using the scaling law of the percolation theory, it was found that the theoretical conductivity of the nanocomposite exhibited an exponential factor, (t) of 1.38 instead of the universal t value of 2.

In this study, silver orthophosphate@carbon layer (Ag₃PO₄@C) core/shell heterostructure photocatalyst was prepared for the first time. The results showed that a uniform carbon layer was formed around the Ag₃PO₄. By adjusting the hydrothermal fabrication parameters, the thickness of carbon layer could be easily controlled. Furthermore, the Ag₃PO₄@C had remarkable light absorption in the visible region. Photocatalytic tests displayed that the Ag₃PO₄@C heterostructures possessed a much higher degradation rate of phenol than pure Ag₃PO₄ under visible light. The enhanced photocatalytic activity could be attributed to high separation efficiency of photogenerated electrons and holes based on the synergistic effect between carbon as a sensitizer and Ag₃PO₄. Recycle tests showed that the Ag₃PO₄@C core/shell heterostructures maintained high stability over several cycles. The good stability could be attributed to the protection of insoluble carbon layer on the surfaces of Ag₃PO₄ crystals in aqueous solution.

The increasing energy crisis promotes the study on novel electrode materials with high performance for supercapacitive storage and energy conversion. Transition metal phosphates have been reported as a potential candidate due to the unique coordination and corresponding electronic structure. Herein, we adopted a facile method for preparing NaCoPO₄@C derived from a metal organic framework (MOF) as a bifunctional electrode. ZIF-67 was synthesized before a refluxing process with Na₂HPO₄ to form a precursor, which is transformed into the final product via calcination in different atmospheres. Specifically, the resultant NaCoPO₄@C exhibits a high specific capacitance of 1178.7Fg${}^{-1}$ at a current density of 1Ag${}^{-1}$ for a supercapacitor. An asymmetric supercapacitor (ASC) assembled with active carbon displays a high capacitance of 163.7Fg${}^{-1}$ at 1Ag${}^{-1}$. In addition, as an oxygen evolution reaction (OER) catalyst, the NaCoPO₄@C electrode requires only 299mV to drive a current density of 10mAcm${}^{-2}$. These results suggest that the rational design of MOF-derived NaCoPO₄@C provides a variety of practical applications in electrochemical energy conversion and storage.

Multi-element doped porous carbon materials are considered as one of the most promising electrode materials for supercapacitors due to their large specific surface area, abundant mesoporous structure, heteroatom doping and good conductivity. Herein, we propose a very simple and effective strategy to prepare nitrogen, sulfur co-doped hierarchical porous carbons (N-S-HPC) by one-step pyrolysis strategy. The effect of sole dopants as a precursor was a major factor in the transformation process. The optimized N-S-HPC-2 possesses a typical hierarchically porous framework (micropores, mesopores and macropores) with a large specific surface area (1284.87m² g${}^{-1})$ and N (4.63 atomic %), S (0.53 atomic %) doping. As a result, the N-S-HPC-2 exhibits excellent charge storage capacity with a high gravimetric capacitance of 360F g${}^{-1}$ (1 A g${}^{-1})$ in three-electrode systems and 178F g${}^{-1}$ in two-electrode system and long-term cycling life with 87% retention after 10,000 cycles in KOH electrolyte.

Nanofluids are promising in solar harvesting and solar thermal utilization. Ethylene glycol (EG) nanofluids have the advantages of high boiling point and low volatility, and therefore are highly desired in some circumstances. In this study, the solar harvesting and solar thermal conversion properties of EG were significantly enhanced by carbon chain nanostructures (CCNSs). The prepared CCNSs/EG nanofluids showed greater optical absorption compared to EG in the wavelength range from 250nm to 1400nm. The solar weighted absorption factor (Am) of the CCNSs/EG nanofluids was 95.9% at the mass fraction of 0.05 wt.%. The enhancement was 649.2% compared to that of EG. The photothermal conversion efficiency was determined to be 97.7% and the enhancement of 83.0% was achieved. An enhancement of 1.2% in thermal conductivity was also been observed. These enhancements can be ascribed to the special architectures of the CCNSs that provide fast transfer path for the generated heat.

Carbon quantum dots (C QDs) were synthesized using lemon juices as a precursor by hydrothermal method. The impact of C QDs on the biomass, density of spores, and morphology of Aspergillus oryzae (A. oryzae) was studied for the first time. The results revealed that C QDs had a graphite structure, and their average size was about 4.25nm. As a carbon source, C QDs were more beneficial to A. oryzae growth than glucose. It has been observed that C QDs worked as an activator to improve the yield of A. oryzae, and the biomass and density of spores of A. oryzae cultured with 15mg C QDs were about 1.46 and 2.00 times higher than that in control medium (without C QDs). Our work can give a new idea for improving the yield of A. oryzae or microorganisms and satisfy industrial requirements.

The water-soluble fluorescent carbon nanomaterials with low toxicity and high biocompatibility are considered as promising materials for biomedical and sensor applications. Here, we report that a nanosensor system has been developed to simultaneously detect two valence states of iron (Fe²⁺ and/or Fe³⁺) in aqueous solution based on fluorescent carbon nanoparticles (FCNs). The nanosensor has high selectivity and sensitivity with a limit of detection (LOD) of 5 μM, which is equivalent to 0.3 mg/L (5.36 μM) of iron in drinking water by United States Environment Protection Agency (US-EPA). Furthermore, a distinguishable color change of solution, from pale yellow to red-brown, can be observed as iron concentration reaching 40 μM, which provides way for fast, visible detection of irons.

Joint arthroplasty, specifically total knee arthroplasty (TKA) and total hip arthroplasty (THA), are two of the highest value surgical procedures. Over the last several decades, the materials utilized in these surgeries have improved and increased device longevity. However, with an increased incidence of TKA and THA surgeries in younger patients, it is crucial to make these materials more durable. The addition of nanoparticles is one technology that is being explored for this purpose. This review focuses on the addition of nanoparticles to the various parts of arthroplasty surgery comprising of the metallic, ceramic, or polyethylene components along with the bone cement used for fixation. Carbon additives proved to be the most widely studied, and could potentially reduce stress shielding, improve wear, and enhance the biocompatibility of arthroplasty implants.

Nucleation is a word derived from nuclear family and refers to the concept of progenitor, the mother and the father of any family, which has been at the root of human life for many thousands of years. From it has emerged the concept of a breeding line of humans. Only in the last few centuries of civilization have physicists borrowed the word, and later biologists for Schwann's cell theory. Very recently it has passed to atomic theory, spectroscopy, radioactivity and to atomic bombs, fission and fusion. In physics any change in the free energy state of matter involves a nucleation or ordering of atoms into a new pattern as in any change to gas, liquid or solid or in the packing of atoms in carbon black, graphite, or diamond. Thus the word nucleation is not derived from atomic physics or cell biology. To be so deluded makes it difficult to understand the simple matter of pattern setting in any change of state.

Joint arthroplasty, specifically total knee arthroplasty (TKA) and total hip arthroplasty (THA), are two of the highest value surgical procedures. Over the last several decades, the materials utilized in these surgeries have improved and increased device longevity. However, with an increased incidence of TKA and THA surgeries in younger patients, it is crucial to make these materials more durable. The addition of nanoparticles is one technology that is being explored for this purpose. This review focuses on the addition of nanoparticles to the various parts of arthroplasty surgery comprising of the metallic, ceramic, or polyethylene components along with the bone cement used for fixation. Carbon additives proved to be the most widely studied, and could potentially reduce stress shielding, improve wear, and enhance the biocompatibility of arthroplasty implants.