Narrow Results

This paper analyzes the design automation of embedded Systolic Array Processors (SAPs), into large scale Field Programmable Gate Array (FPGA) devices. SAPs are hardware implementations of a class of iterative, high-level language algorithms, for applications where the high-speed of processing has the principal meaning of a design. Embedding SAPs onto FPGAs is a complex process. The optimization phase in this process reduces the SAP significantly, thus less FPGA area is occupied by the embedded design, without any loss in the final performance. The present paper examines the effect of Projection Vectors (PVs) and Task Scheduling Vectors (TSVs) on the optimization process. Two optimization approaches are examined, namely technology mapping using FlowMap and Flowpack algorithms and optimization via logic synthesis using Xilinx Synthesis Tool. The multiplication of matrices, with entries being up to 32-bit integer vectors, has been taken as a sample space for the experiments conducted. The results, confirm that the selection of PV and TSV greatly affects the number of input/output signal connections of the FPGA, while the selection of an optimization approach affects the final number of logic resources occupied on the targeted device.

Low-power circuits are highly in demand in this power-hungry world of batteries and portable devices. Though many low-power techniques are prevalent at various stages of a VLSI design cycle, but most of them have retained their own domain. A novel, digital-in-concept, fully differential voltage comparator circuit has been implemented in this paper. This provides substantial reduction in the power consumption. It is highly cost-effective, both in terms of time and efforts as an analog circuit is being designed on digital basis. The proposed voltage comparator has been designed and simulated in Cadence${}^{\circledR }$ Virtuoso Analog Design Environment using UMC 180nm CMOS technology at 1.8V supply.

This paper presents a scalable Fully-digital differential analog voltage comparator designed in Semi-Conductor Laboratory (SCL) 180nm complementary metal-oxide semiconductor technology. The proposed design is based on a digital design approach and is easily configurable to lower technology nodes. This design methodology makes the circuit less sensitive to process variations and takes fewer design efforts suitable for Systems-on-a-Chips (SOCs) application. The proposed circuit is designed and simulated in Cadence Virtuoso Analog Design Environment at the supply voltage ranging from 1V to 1.8V. The fully-digital analog voltage comparator has been synthesized using Synopsys Design Vision and auto-placed & auto-routed using Synopsys IC Compiler. This proposed comparator has a resolution of up to 7-bit at a supply voltage of 1.8V and a worst-case operating frequency of about 750 MHz at the TT corner. The obtained value of the offset voltage and delay is 0.55mV and 0.72 ns, respectively. The simulated results have shown that the power dissipation of the proposed scalable analog voltage comparator is $150\mu \mathrm{\text{W}}@1$V and $312\mu \mathrm{\text{W}}@1.8$V supply voltage, respectively. Also, the RC extracted post-layout simulations have been implemented to verify the performance, which does not affect the results much.

A parity generator as a combinational logic circuit in digital circuits can generate the parity bit in the transmitter. It is very applicable in digital networking and communications. Also, rather than diodes and transistors, quantum dots will be used in the next-generation circuits. Quantum-dot Cellular Automata (QCA) offers a new platform where binary data is represented by polarized cells that are defined by the electron configurations. Therefore, a coplanar 4-bit parity generator is suggested in this work. This new arrangement eliminates complicated crossovers and provides complete access to all input and output pins. An XOR gate is used to implement the suggested architecture. Simulation waveforms and performance data confirm the proposed circuits’ functioning and advantages. The suggested four-bit parity generator uses less overhead than its equivalents. We simulated and tested the suggested circuit with the assistance of the QCADesigner 2.0.3 simulator. The QCADesigner software findings demonstrate that the suggested design is simpler and less expensive than earlier designs. Compared to the present best design, the suggested four-bit parity generator reduces cell number and latency by 55.29% and 40%, respectively.