Narrow Results

To discount effects of uneven illumination we have designed and tested a neural network that can adaptively control light sensitivity at the photosensor level. Our neural network architecture simulates the ON channel response of the visual system using multiple layers of hexagonally arranged nodes having partially overlapping receptive fields of different spatial frequencies. Feedforward connections are excitatory while feedback pathways subserve lateral inhibition. The outputs of these nodes are combined so as to maximize the signal to noise ratio while providing constant feedback that resets photosensor thresholds to maintain high sensitivity. A sparse primitive interpolation technique was applied to the ensemble output of the sensitivity control module to determine if it sufficiently encodes surface reflectance. The motivation is to determine to what extent the ratio principle, as captured by the sensitivity control system, explains the lightness constancy phenomenon and whether information contained within an ON channel response is adequate to reconstruct the surface lightness. Our connectionist architecture can account for many characteristics attributed to the lightness constancy phenomenon observed in biological systems. The results suggest that our module maintains high sensitivity across a large range of intensities without interfering with the transmission of visual information embedded in the spatial discontinuities of intensity. However, the amplitude of the luminance derivative as encoded in ON channel responses is not sufficient to approximate surface reflectance.

A fully integrated three stage cascaded radio frequency variable gain amplifier (RFVGA) linearly controlled by exponential current generation circuit is presented. The gain control is unequally distributed in each stage for noise figure (NF) and linearity performance. The dB-linear gain control is realized using pseudo exponential current generated by CMOS current summing circuit with a voltage to current converter. The RFVGA has over 50 dB dynamic range. Gain changes from -38.5 to 16.8 dB according to control voltage that varies from 0.5 to 1.8 V. It operates at 0.95–2.15 GHz. This design is implemented in 0.18 μm CMOS technology.

A gain-clamped fiber Raman amplifier is proposed and builds up. The result shows that gain fluctuation will be champed to a lower level with the dynamic gain control. And the dynamic gain control method is also fit for the Raman amplifiers with multi-wavelength pump.

To discount effects of uneven illumination we have designed and tested a neural network that can adaptively control light sensitivity at the photosensor level. Our neural network architecture simulates the ON channel response of the visual system using multiple layers of hexagonally arranged nodes having partially overlapping receptive fields of different spatial frequencies. Feedforward connections are excitatory while feedback pathways subserve lateral inhibition. The outputs of these nodes are combined so as to maximize the signal to noise ratio while providing constant feedback that resets photosensor thresholds to maintain high sensitivity. A sparse primitive interpolation technique was applied to the ensemble output of the sensitivity control module to determine if it sufficiently encodes surface reflectance. The motivation is to determine to what extent the ratio principle, as captured by the sensitivity control system, explains the lightness constancy phenomenon and whether information contained within an ON channel response is adequate to reconstruct the surface lightness. Our connectionist architecture can account for many characteristics attributed to the lightness constancy phenomenon observed in biological systems. The results suggest that our module maintains high sensitivity across a large range of intensities without interfering with the transmission of visual information embedded in the spatial discontinuities of intensity. However, the amplitude of the luminance derivative as encoded in ON channel responses is not sufficient to approximate surface reflectance.