Narrow Results

This paper presents the design and simulation of static random access memory (SRAM) using two channel spatial wavefunction switched field-effect transistor (SWS-FET), also known as a twin-drain metal oxide semiconductor field effect transistor (MOS-FET). In the SWS-FET, the channel between source and drain has two quantum well layers separated by a high band gap material between them. The gate voltage controls the charge carrier concentration in the quantum well layers and it causes the switching of charge carriers from one channel to other channel of the device. The standard SRAM circuit has six transistors (6T), two p-type MOS-FET and four n-type MOS-FET. By using the SWSFET, the size and the number of transistors are reduced and all of transistors are n-channel SWS-FET. This paper proposes two different models of the SWS-FET SRAM circuits with three transistors (3T) and four transistors (4T) also addresses the stability of the proposed SWS-FET SRAM circuits by using the N-curve analysis. The proposed models are based on integration between Berkeley Shortchannel IGFET Model (BSIM) and Analog Behavioral Model (ABM), the model is suitable to investigate the gates configuration and transient analysis at circuit level.

This paper describes fabrication of Quantum Dot Gate n-FETs using SiOx-cladded Si quantum dot self-assembled on the tunnel gate oxide. Experimental I-V characteristics exhibiting 4-states are presented. Simulation is presented for the operation of viable 4-state SRAMs using QDG-FETs.

This paper describes the fabrication of quantum dot gate (QDG) $n$-FETs using GeOx-cladded Ge quantum dot self-assembled on tunnel gate oxide. Experimental I–V characteristics exhibiting 4-states are presented. Simulations are presented for the operation of a viable 8-state SRAM using QDG-FETs.

This paper describes fabrication of Quantum Dot Gate n-FETs using SiOx-cladded Si quantum dot self-assembled on the tunnel gate oxide. Experimental I-V characteristics exhibiting 4-states are presented. Simulation is presented for the operation of viable 4-state SRAMs using QDG-FETs.

This paper describes the fabrication of quantum dot gate (QDG) n-FETs using GeOx-cladded Ge quantum dot self-assembled on tunnel gate oxide. Experimental I–V characteristics exhibiting 4-states are presented. Simulations are presented for the operation of a viable 8-state SRAM using QDG-FETs.

This paper presents the design and simulation of static random access memory (SRAM) using two channel spatial wavefunction switched field-effect transistor (SWS-FET), also known as a twin-drain metal oxide semiconductor field effect transistor (MOS-FET). In the SWS-FET, the channel between source and drain has two quantum well layers separated by a high band gap material between them. The gate voltage controls the charge carrier concentration in the quantum well layers and it causes the switching of charge carriers from one channel to other channel of the device. The standard SRAM circuit has six transistors (6T), two p-type MOS-FET and four n-type MOS-FET. By using the SWS-FET, the size and the number of transistors are reduced and all of transistors are n-channel SWS-FET. This paper proposes two different models of the SWS-FET SRAM circuits with three transistors (3T) and four transistors (4T) also addresses the stability of the proposed SWS-FET SRAM circuits by using the N-curve analysis. The proposed models are based on integration between Berkeley Shortchannel IGFET Model (BSIM) and Analog Behavioral Model (ABM), the model is suitable to investigate the gates configuration and transient analysis at circuit level.