Journal of Earthquake Engineering

Various approaches are currently used for the analysis of piles under vertical and lateral loading. Among these, the beam-on-a-nonlinear Winkler foundation (BNWF) approach using published P–y, T–z and Q–z curves is widely used in practice. In this approach, the P–y and T–z responses are generally uncoupled from each other. The objective of this paper is to investigate the influence that the coupling of the P–y and T–z responses has on the cyclic and dynamic response of piles in cohesionless soil. A cyclic model is first developed and a parametric study is conducted to investigate the effect the initial confining pressure, angle of wall friction and effective vertical stiffness have on the lateral cyclic hysteretic response. A dynamic model is then developed, and used to study the response of a single pile in cohesionless soil under horizontal and/or vertical ground motion. Results from the parametric study showed that the three parameters did not have a significant influence on the lateral cyclic hysteretic response. Under horizontal and/or vertical ground motion, the horizontal ground motion was observed to dominate the inertial interaction response, and significantly affected both the horizontal and vertical displacement response, mainly due to second-order P–Δ and gapping effects.

Fragility functions that estimate the probability of exceeding different levels of damage in slab-column connections of existing non-ductile reinforced concrete buildings subjected to earthquakes are presented. The proposed fragility functions are based on experimental data from 16 investigations conducted in the last 36 years that include a total of 82 specimens. Fragility functions corresponding to four damage states are presented as functions of the level of peak interstory drift imposed on the connection. For damage states involving punching shear failure and loss of vertical carrying capacity, the fragility functions are also a function of the vertical shear in the connection produced by gravity loads normalised by the nominal vertical shear strength in the absence of unbalanced moments. Two sources of uncertainty in the estimation of damage as a function of lateral deformation are studied and discussed. The first is the specimen-to-specimen variability of the drifts associated with a damage state, and the second the epistemic uncertainty arising from using small samples of experimental data and from interpreting the experimental results. For a given peak interstorey drift ratio, the proposed fragility curves permit the estimation of the probability of experiencing different levels of damage in slab-column connections.

A study aimed at evaluating earthquake damage scenarios and seismic hazard of Messina using historical data, is presented. The analysis of coeval reports allowed us to reconstruct the seismic history of the city and to obtain a homogeneous earthquake site catalogue based on intensity assessed by the European Macroseismic Scale 1998. In the last 1200 years Messina was destroyed once (1908, intensity X-XI EMS) and suffered effects estimated between intensities VII and IX EMS many times (e.g. 853, 1169, 1494, 1509, 1599, 1693, 1783, 1894, 1909). Destruction or severe damage which affected the city are mainly related to earthquakes occurring in the Messina Straits and Southern Calabria, while slighter, moderate effects are usually due to shocks taking place in the seismogenic sources of SE Sicily, Gulf of Patti and Northern Calabria. The damage scenarios of the most relevant events, delineated using coeval urban plans of the city, showed that damage distribution is strongly conditioned by the different soil response. A probabilistic seismic hazard assessment was obtained by using site observed intensities: The expected intensity in a time span of 50 years (i.e. maximum intensity characterised by at least 10% exceedance probability in 50 years) is IX EMS; the expected intensity in a time span of 300 years (10% exceedance probability in 300 years) is X EMS.

The general trends of the inelastic behaviour of plan-asymmetric structures have been studied. Systems with structural elements in both orthogonal directions and bi-axial eccentricity were subjected to bi-directional excitation. Test examples include idealised single-storey and multi-storey models, and a three-storey building, for which test results are available. The response in terms of displacements was determined by nonlinear dynamic analyses. The main findings, limited to fairly regular and simple investigated buildings, are: (a) The amplification of displacements determined by elastic dynamic analysis can be used as a rough, and in the majority of cases conservative estimate in the inelastic range. (b) Any favourable torsional effect on the stiff side, which may arise from elastic analysis, may disappear in the inelastic range. These findings can be utilised in the approximate pushover-based seismic analysis of asymmetric buildings, e.g. in the N2 method. It is proposed that the results obtained by pushover analysis of a 3D structural model be combined with the results of a linear dynamic (spectral) analysis. The former results control the target displacements and the distribution of deformations along the height of the building, whereas the latter results define the torsional amplifications. The proposed approach is partly illustrated and evaluated by test examples.

Experimental and numerical simulations are performed to evaluate the modification of ground response resulting from either the presence of soft layers or occurrence of partial liquefaction. Results from two densely instrumented dynamic centrifuge tests are presented to show the ambiguous role played by the presence of a soft layer. It was found that the lateral extent of the soft layer has significant influence on the overall response of the layered strata and any structure founded on it. The experimental observations are supported by simplified numerical analysis. The amplification or deamplification of the input motion is found to be a function of the ratio of the width of soft layer to the wave length. Based on the numerical analysis, a general function describing the site amplification is presented which may be used as a guide in seismic design of foundations in such layered strata.

The city of Oslo, Norway, was affected by a magnitude 5.4 earthquake in 1904 causing widespread minor damage. The earthquake occurred around 100 km south of Oslo within the Permean rift structure that runs North-South along the Oslofjord, and deep clay deposits under the city contributed to the damages. A seismic risk scenario including soil amplification and buildings classifications has been conducted with two earthquake sources, one very close to the city and one near the 1904 epicenter. Both scenarios exhibit strong dependencies on the soft clays underlying large parts of Oslo. The results confirm the 1904 effects, but also show a strong dependency on the applied attenuation functions. All computations are based on the capacity-spectrum method, and the predefined pushover curves and vulnerability functions were adopted from the HAZUS code. With this basis, the computational scheme was developed independent from the GIS framework, and a weighted logic tree formulation was implemented for appropriate treatment of epistemic uncertainties.

The development of alternative solutions for precast concrete buildings based on jointed ductile connections has introduced innovative concepts in the design of lateral-load resisting frame and wall systems. Particularly efficient is the hybrid system, where precast elements are connected via post-tensioning techniques and self-centring and energy dissipating properties are adequately combined to achieve the target maximum displacement with negligible residual displacements. In this contribution, the concept of hybrid system is extended to bridges as a viable and efficient solution for an improved seismic performance when compared with monolithic counterparts. Critical discussion on the cyclic behaviour of hybrid systems, highlighting the most significant parameters governing the response, is carried out.

The concept of a flexible seismic design (displacement-based) of hybrid bridge piers and systems is proposed and its reliability confirmed by quasi-static cyclic (push-pull) and nonlinear time-history analyses based on lumped plasticity numerical models.

In this paper, a methodology is suggested and tested for evaluating the relative performance of conventional and adaptive pushover methods for seismic response assessment. The basis of the evaluation procedure is a quantitative measure for the difference in response between these methods and inelastic dynamic analysis which is deemed to be the most accurate. Various structural levels of evaluation and different incremental representations for dynamic analysis are also suggested. This method is applied on a set of eight different reinforced concrete structural systems subjected to various strong motion records. Sample results are presented and discussed while the full results are presented alongside conclusions and recommendations, in a companion paper.