Resonance Analysis of Cantilever Plates Subjected to Moving Forces by a Semi-Analytical Method
Abstract
Cantilever plate structures are widely used in civil and aerospace engineering. Here, a semi-analytical method is proposed to calculate the dynamic responses of cantilever plates subjected to moving forces. The Rayleigh–Ritz method is used to obtain the semi-analytical modal frequencies and shapes of a thin, isotropic, and rectangular cantilever plate using the assumed mode shapes that fulfill the boundary conditions of the plate. The modal superposition method is used to decouple the motion equations of the cantilever plate to obtain a series of modal equations. Then, the generalized forces are transformed into a Fourier series in terms of discrete harmonic forces. The dynamic responses of the cantilever plate are obtained by superimposing the analytical responses of a number of single-degree-of-freedom modal systems under discrete harmonic forces. The proposed semi-analytical method is verified through comparison with the numerical method. Then, the vibration of the cantilever plate under the action of moving forces is investigated based on the semi-analytical results. It is found that the contribution of the high-order modes to the dynamic responses of the plate cannot be ignored. In addition, the wavelengths of the mode shapes not only affect the magnitude of the modal forces but also the dominant frequency of the modal forces. Resonant responses of the plate are produced by the moving forces when the load interval equals the wavelength of the mode shape of a high-order mode and the exciting frequency of the moving forces equals the natural frequency of this mode.
| Remember to check out the Most Cited Articles! |
|---|
|
Remember to check out the structures |
