Narrow Results

Introduction: Giant cell Tumors (GCT) are relatively common lesions that are most often encountered in middle aged women [Salunke AA, Shah J, Warikoo V, Chakraborty A, Pokharkar H, Chen Y, Pruthi M, Pandit J. Giant cell tumor of distal radius treated with ulnar translocation and wrist arthrodesis. J Orthop Surg 2017 25(1): 2309499016684972, 2017, https://doi.org/10.1177/2309499016684972]. As 25% of these are usually locally aggressive, early diagnosis, and treatment are of paramount importance [Dorfman HD, Czerniak B. Bone Tumors. St. Louis, Mosby (1998)]. Due to the high incidence of local recurrence following simple curettage, it is no longer a preferred line of treatment. In recent times, extended curettage, wide resection or en-bloc resection with bone grafting have supplanted simple curettage [Şirin E, Akgülle AH, Topkar OM, Sofulu Ö, Baykan SE, Erol B. Mid-term results of intralesional extended curettage, cauterization, and polymethylmethacrylate cementation in the treatment of giant cell tumor of bone: A retrospective case series. Acta Orthop Traumatol Turc54(5): 524–529, 2020, https://doi.org/10.5152/j.aott.2020.19082].

Case Scenario: A 22-year-old female patient presented to the OPD with a swelling in her right wrist which she noticed two years back. The swelling gradually increased to the size of a lemon at presentation and was initially painless but eventually became painful. The patient was evaluated based on clinical history, examination, and radiography. A clinical and radiological diagnosis of GCT of the distal radius was made. FNAC was done to confirm the same. Further, the lungs were screened for metastasis. She underwent en-bloc resection of the lesion followed by reconstruction with non-vascularized proximal fibular autograft secured with a DCP and $K$ -wires. The excised specimen was dispatched for Fig. 1. The swelling at presentation histopathological examination and confirmed to be a Giant Cell Tumor. Regular follow-up schedule was initiated at 2 weeks, 6 weeks, 3 months, 1 year, 36 weeks, and 2 years postoperatively. Her functional outcome was monitored by assessing the wrist range of movements and the Mayo wrist scores.

Results: The patient’s Mayo wrist scores showed an increasing trend during follow-up, indicating improved functional outcomes. Recurrence was not noted during the follow-up period.

Discussion: Tumor in the distal radius metaphyseoepiphyseal region is commonly associated with extracompartmental involvement, cortical invasion, and pathologic fracture [Yang YF, Wang JW, Huang P, Xu ZH. Distal radius reconstruction with vascularized proximal fibular autograft after en-bloc resection of recurrent giant cell tumor. BMC Musculoskelet Disord17(1): 346, 2016. https://doi.org/10.1186/s12891-016-1211-8]. Hence, curettage is not an optimal method in the distal radius. Thus, wide excision is the optimal choice of treatment. However, this creates a defect at the distal end of the radius. The preferred options for the management of the defect comprise of osteoarticular allografts, vascularized grafts, non-vascularized bone grafts, and custom-made prostheses [Saini R, Bali K, Bachhal V, Mootha AK, Dhillon MS, Gill SS. En bloc excision and autogenous fibular reconstruction for aggressive giant cell tumor of distal radius: a report of 12 cases and review of literature. J Orthop Surg Res6 : 14, 2011, https://doi.org/10.1186/1749-799X-6-14]. Vascularized bone grafts have been proposed to have a better union rate and lesser complication rate as compared to non-vascularized options. Thus, with our case report, we would like to highlight the effectiveness of the non-vascularized proximal fibular autograft in the reconstruction following en bloc excision of the distal radius.

Conclusion: Hence, en-bloc resection and non-vascularized fibular bone grafting is a valuable method of treatment of GCTs of the distal radius. It is also associated with low recurrence rates and improved wrist function in the course of follow-up.

Fracture of the distal radius is a common injury. Functional recovery correlates well with restoration of anatomy and early motion. Various fixation methods have been proposed to achieve this. To evaluate the stability of different treatment options, a cadaveric model for biomechanical study of fixation methods for AO type C2 fracture of distal radius was designed and its efficacy assessed in the present experiment.

An AO type C2 distal radius fracture was simulated in a cadaver model by creating a metaphyseal defect of 5 mm and an intra-articular defect of 2 mm. Five different methods of plate osteosynthesis were tested biomechanically in each of six fresh cadaveric hands. Biomechanical testing suggested that cement augmented plating plus screws in the distal fragment was the strongest. Dorsal and volar plating plus screws on both sides of the distal fragment had the same effect of restoring stiffness and load transmission pattern as fixation with double plating plus volar screws alone. Fixation with plating plus dorsal screws was significantly weaker than these three methods, and double buttress plating with no screws in the distal fragments was the weakest.

We performed a retrospective study of 15 patients with AO/ASIF C3.2 fracture of the distal radius. All patients were treated with arthroscopically assisted reduction of the radiocarpal joint followed by palmar plating with autologous bone graft, with a follow-up evaluation of 24 months. According to the demerit point system of Gartland and Werley, five patients had excellent results and 10 had good results. Grade 1 arthritic changes were found in 10 patients even though with no step-off on radiographs. In the current study, this combined treatment was challenging and useful for AO/ASIF C3.2 fractures.

The purpose of this study was to develop plates that fit the contour of the distal radius of the Japanese and can be inserted less invasively.

Three-dimensional models of 36 radii of 18 volunteers were prepared. Using these models, the shape of the cortical bone on the radial margin of the distal radius and just below the dorsal fourth compartment of the wrist, to which the plates were expected to be applied, was measured, and the curves of the plates were determined. The functions of approximated curves of the plates were: [y = -2 × 10^-8x⁵ - 2 × 10^-6x⁴ + 0.0006 x³ - 0.0312 x² + 0.3274 x + 15.224 on the radial margin of the distal radius and [y = 7 × 10^-7x⁵ - 0.0001 x⁴ + 0.0078 x³ - 0.2355 x² + 3.1815 x - 5.6383 just below the fourth compartment.

The clinical results of the application of double dorsal plates were satisfactory in clinical cases for the distal radius fractures.

We report a case of injury, simultaneous fractures of scaphoid, distal radius and radial head. It was treated by fixation operatively, and then early active range of motion exercise was started.

Benign fibrous histocytoma of bones is a very rare tumour and only a few cases have been reported. We report a case of 40-year-old patient with no significant previous medical history who presented with a painful lesion in his right wrist joint. Incision biopsy was done and there was a histological picture similar to a metaphyseal fibrous defect (non-ossifying fibroma). This was managed with excision of the lesion and filling the defect with cancellous and cortical bone grafts from the left iliac bone. To our knowledge, this is the second case report of a benign fibrous histocytoma involving the distal radius in adult. In this case report, we review similar cases in the literature and discuss the differential diagnoses of this lesion.

Volar locking plates are increasingly used in the management of distal radius fractures. As with any new implant, understanding the rate and type of potential metalwork related complications is important. In this study, we reviewed 114 distal radius fractures treated with volar locking plating. Our aim was to determine the type and rate of metalwork complications requiring reoperation. In our series, 12 cases (10%) underwent further surgery for metalwork related complications mainly for screw protrusion into the radiocarpal joint following fracture collapse. Our results suggest that volar locking plates are associated with a high rate of metal work related complications requiring further surgery. Technical aspects to reduce such complications are discussed.

Aim: The aim of the study was to assess how adequately distal radial fracture reduction was reproduced and maintained with the distal volar radius anatomic DVR-A (Biomet, Inc) locking plate.

Methods: We looked at a consecutive series of 111 patients treated with the DVR-A plate at our institution from 2007–2010. The preoperative, intra-operative, and postoperative films were reviewed. The AO and Frykman classification was recorded. The sagittal tilt, radial inclination, and radial length were measured on intra-operative X-rays and compared with final follow-up X-rays. The last recorded range of motion at follow-up and a functional assessment using the Disabilities of the Arm, Shoulder, and Hand (DASH) score was recorded.

Results: At final follow-up a mean radial inclination of 22.22 degrees (11 to 38 degrees), radial height of 11.85 mm (6 to 18 mm), and sagittal tilt of 6.71 degrees volar (-9 to 19 degrees) was achieved. From initial post-operative films, to final follow-up X-rays there was a mean increase of 0.17 degrees in radial inclination, a mean loss of 0.36 mm radial height, and a mean loss of 2.17 degrees volar tilt. The mean extension was 46.8 degrees, flexion 48.3 degrees, pronation 77.4 degrees, supination 74.8 degrees, radial deviation 15.3 degrees and the ulnar deviation 19 degrees. The mean DASH score was 12.8 (0–68).

Conclusion: The DVR-A plate achieved a highly satisfactory reduction of radial length and radial inclination, with a small loss of volar sagittal tilt at final follow-up. A good functional outcome was reported, with a satisfactory range of motion achieved. The DVR-A plate is a safe and effective treatment for unstable and intra-articular displaced distal radius fractures, particularly in younger patients, in the short term.

The purpose of this study is to highlight a cohort of patients with a comminuted volar shearing type of distal radius fractures (AO B3.3) with the volar ulnar fragment that is prone to re-displace, resulting in volar subluxation of the radiocarpal joint. We report our experience with two such patients with re-displacement of the fragment and joint requiring repeat surgery; one of whom required a third procedure to stabilize that fragment. Three subsequent patients were successfully treated with one surgery when particular attention was paid to stabilize the volar ulnar fragment. This highlights the importance of stabilizing this fragment at the primary procedure.

Introduction: We report the presentation, management, and outcome in five children with osteoarticular tuberculosis of distal radius.

Patients: Patients were recruited in a prospective study. All patients underwent an open biopsy, curettage and diagnosis confirmed by histopathological/microbiological examination. In cavitary lytic lesions, bone grafting was also undertaken. The multidrug anti-tubercular chemotherapy was given for one year.

Observations: Five patients were included in the study. The average follow-up post-completion chemotherapy was 34.8 months. Bony lesions presented as a poorly defined radiolucent lytic area in metaphysis, cavitary lytic lesions with or without sequestrum or spanned the physeal plate. At final follow-up, except for one case, a full pain free range of movements was achieved in all cases. Fibular graft was used in two cases with cavitary lesions and incorporated well in both cases.

Conclusions: Tuberculosis can involve the adjacent physis and can be multifocal. The presentation is usually lytic with minimal sclerosis. For smaller ill defined lesions, curettage and multidrug anti-tubercular chemotherapy results in excellent outcome. Cavitary lytic lesions should be bone grafted as there is a risk of pathological fractures.

Giant cell tumors of distal radius are locally aggressive tumors with a high rate of recurrence. Though surgery remains the mainstay of treatment, reconstruction remains a challenge in cases of recurrence. Recurrences of GCT in autogenous fibular grafts have been rarely reported and pathological fractures through such grafts are even rarer. Ulnocarpal arthrodesis has never been described as a limb preservation procedure in such a recurrent lesion in distal radius with pathological fracture through a well incorporated fibular graft. A case of pathological fracture in a well incorporated autogenous non-vascularized fibular bone graft in recurrent GCT of distal radius and its successful management with ulnocarpal arthrodesis is reported. In such a scenario where other reconstructive options like allograft or prosthetic reconstructions are not likely to succeed, ulnocarpal arthrodesis may be considered as a salvage procedure.

Background: Our aims were to identify iatrogenous injuries to the palmar branch of the median nerve sustained during volar plate fixation of the distal radius, make the clinician aware of this relatively uncommon complication of distal radius fixation, to emphasise common threads in symptomatology and to propose an algorithm for evaluation and management.

Methods: Retrospectively interrogating our database over a 5 year period, the case records, neurophysiology records, operative records, therapy records were reviewed. The data was analysed with regard to the grade of surgeon performing the procedure, the site of injury, complexity of the fracture, delay to surgery, implant choice and outcome of the treatment. Variations in nerve anatomy were documented during revision surgery and common themes in symptomatology and clinical presentation were identified.

Results: Seven patients with an iatrogenic injury involving the palmar branch of the median nerve associated with volar plate fixation of the distal radius were assessed. The male: female ratio was 1:6 and the mean age of patients was 47.8 years (33-74 years). The initial operative fixation was undertaken by a consultant orthopaedic surgeon at a mean of 7.8 (1-17) days from injury. The mean time from fracture fixation surgery to referral to the peripheral nerve injury service was 8.9 (2-36) months. Six patients presented with pain on attempted wrist extension. Five patients had parasthesia, hyperaesthesia or dysaesthesia in the distribution of the PCBMN. Anaesthesia or hypoaesthesia was present in three patients. Two patients presented with symptoms of complex regional pain syndrome (CRPS) Type 2.

Conclusions: Revising relevant anatomy and possible variations as well as careful placements of retractors in the region of the median nerve could bring down these injuries. We propose an algorithm for their management.

Hardware-related complications are rare in patients with distal radius fractures who were surgically fixed with volar-locking plates. In this report, we present a case of locking screw loosening and migration to the palm four years following the treatment of type 23-C1 distal radius fracture with a volar locking-plate. This complication occurred without evidence of trauma, infection, non-union or plate breakage. Orthopaedic surgeons should be aware of such rare complication and add it to the list of potential postoperative complications when counseling their patients preoperatively.

Background: The use of volar locking plate in distal radius fracture can lead to extensor tendon rupture due to dorsal screw penetration. The aim of our study was to investigate the occurrence of dorsal and intra-articular screw penetration using CT scan after volar distal radius osteosynthesis for distal radius fractures.

Methods: Thirty patients who underwent distal volar locking plate for distal radius fracture were included in a retrospective study. In all 30 patients no dorsal and intra-articular screw penetration were detected on standard AP and lateral views of a plain radiograph. CT scan of the operated wrist was performed to determine the number of intra-articular and dorsal screw penetrations. Clinical examination was performed to determine the wrist functions in comparison to the normal wrist.

Results: Nineteen wrists were noted to have screw penetration either dorsally or intraarticularly. The highest incidence is in the 2nd extensor compartment where 13 screws had penetrated with a mean of 2.46 mm. Six screws penetrated into the distal radial ulnar joint and five screws into the wrist joint with a mean of 2.83 mm and 2.6 mm, respectively. However, there was no incidence of tendon irritation or rupture.

Conclusions: This study demonstrated a high incidence of dorsal and intra-articular screw penetration detected by CT scan which was not apparent in plain radiograph. We recommend that surgeons adhere to the principle of only near cortex fixation and downsizing the locking screw length by 2 mm.

Background: Three-dimensional computed tomography (3D-CT) imaging has enabled more accurate preoperative planning. The purpose of this study was to investigate the results of a novel, computer-assisted, 3D corrective osteotomy using prefabricated bone graft substitute to treat malunited fractures of the distal radius.

Methods: We investigated 19 patients who underwent the computer-assisted 3D corrective osteotomy for a malunited fracture of the distal radius after the operation was stimulated with CT data. A prefabricated bone graft substitute corresponding to the patient’s bone defect was implanted and internal fixation was performed using a plate and screws. We compared postoperative radiographic parameters of the patient’s operated side with their sound side and analyzed clinical outcomes using Mayo wrist score.

Results: All patients achieved bone union on X-ray imaging at final follow-up. The mean differences of palmar tilt, radial inclination and ulnar variance between the operation side and the sound side were 4.3°, 2.3° and 1.2 mm, respectively. The Mayo wrist score was fair in 4 patients and poor in 15 patients before surgery. At the final follow-up after surgery, the scores improved to excellent in 3 patients, good in 11 patients and fair in 5 patients. There were two patients with correction loss at the final follow-up, but no patient complained of hand joint pain.

Conclusions: We believe that computer-assisted 3D corrective osteotomy using prefabricated bone graft substitute achieved good results because it worked as a guide to the accurate angle.

Background: The purpose of this study was to assess the functional outcomes of simultaneous distal radius fractures (DRFs) and ipsilateral elbow injuries (IEI) and to evaluate whether the DRFs and IEI affect each other’s outcomes.

Methods: From February 2008 to March 2015, 29 of 846 patients treated for DRFs were found to be associated with IEI and 26 patients with follow-up over 12 months were enrolled. There were 12 men and 14 women with a mean age of 55 years (range, 17–86 years). Associated IEI was divided into fracture group (10 patients) and dislocation group (16 patients). Clinical outcomes of DRFs and IEI were evaluated using the Gartland and Werley score and Mayo Elbow Performance Score, respectively. A correlation between the wrist scoring and the elbow scoring was analyzed. In addition, the wrist scoring between fracture group and dislocation group of the elbow was compared.

Results: The DRFs was rated as excellent in 14 patients, good in seven patients, and fair in five patients. The IEI was rated as excellent in 12 patients, good in 11 patients, fair in two patients, and poor in one patient. Acceptable outcome rate of both DRFs and concomitant IEI was 73%, although that of DRFs and IEI was 81% and 88%, respectively. A correlation between the wrist outcome and the elbow outcome showed a negative linear relationship (Spearman rho = −0.435, p = 0.026). In addition, there was no difference in the outcome of DRFs between ipsilateral elbow fractures group and dislocation group.

Conclusions: As a correlation of DRFs and ipsilateral IEI have a linear relationship, the functional outcomes of both injuries are related to each other. Therefore, we recommend that combined injuries should be managed appropriately at the same time for contended recovery of the wrist and elbow.

It is commonly accepted that wide en bloc resection followed by reconstruction is essential in progressive lesions (Campanacci grade III) for local control of possible recurrence. However, specific grade III can be downgraded and treated with intralesional curettage to preserve better wrist function, without increasing the recurrency rates. In this report, Grade III giant cell tumor of the distal radius was successfully treated using vascularized osseous graft from the inner lip of the iliac bone in addition to downgrading strategy.

Background: Distal radius fractures are among the most common fractures encountered in orthopedic practices. If treated operatively, most implants are retained after the fracture heals unless there is hardware failure, limitation of wrist motion, pain, infection, tendon rupture, or tenosynovitis. Complications have been reported during hardware removal, including not knowing the exact implant prior to its removal. If a patient presents for plate removal to a surgeon who did not perform the initial fracture fixation, having a preoperative visual aid can help the treating surgeon choose the right instruments for their removal.

Methods: To identify many of the available distal radius fixation devices, we searched the Internet and contacted local industry representatives. We also approached industry personnel at the commercial exhibit of a national hand society meeting to provide us with implants they manufacture. The implants were placed on the volar and dorsal aspects of sawbone models of the distal radius and in one case the radial styloid, using the screws, screwdrivers and accessories in the standard implant set and then posteroanterior and lateral x-rays of the implants were obtained. We created an atlas and a list of the screwdriver(s) used for each.

Results: We obtained radiographs and photographs for 28 implants that were manufactured by 14 different companies. Two companies sent us radiographs and photographs placed on either a sawbone or cadaveric model. We found that 7 of the implants were outliers and could be identified easily on the x-rays, whereas 21 implants had similar design of shaft and distal components.

Conclusions: To aid the orthopedic surgeon in their removal, we compiled a comprehensive list of most distal radius fixation devices on the market including plates and their corresponding screws and screwdrivers. The goal was to help the surgeon when removing the plate to identify the implant on radiographs.

Background: The role of early radiographic imaging in the management of distal radius fractures (DRFs) is unclear. The aim of this study was to assess whether early post-operative radiographs for DRFs influences the ongoing management of this patient group. We hypothesize that routine early radiographs do not influence the management of DRFs.

Methods: This was a retrospective review of patients undergoing open reduction and internal fixation using a volar locking plate between 2012 and 2017 at our institution. Patients were identified using hospital electronic databases. Clinical information was gathered from the electronic health records and PACS systems and analysed on a spreadsheet. An early post-operative radiograph was defined by the authors as imaging on a patient’s first postoperative visit.

Results: 237 patients were identified. The median number of days patients were reviewed post-operatively was 13 (interquartile range 9–16). 172 (73.1%) patients had early post-operative radiographs, with 100 (58.1%) intra-articular and 72 (41.9%) extra-articular fractures. Of patients who underwent imaging, 7 (4.0%) had their post-operative fracture management altered (7 intra-articular, 0 extra-articular) with 1 (0.58%) requiring immediate surgical revision as indicated by imaging.

Conclusions: Our study questions the value of routine early post-operative radiographs in the management of distal radius fracture fixations, in particular if the fracture is extra-articular. This is of importance in the setting of constrained resources and represents a poor use of limited healthcare facilities, as well as unnecessary radiation exposure.