International Journal of Image and Graphics

Breast cancer is dangerous in women. It is generally found after the symptoms appear. Detecting the breast cancer at an early stage and understanding the treatment are the most important strategies to prevent death from cancer. Generally, for detection of breast cancer, breast Magnetic Resonance Image (MRI) takes place. It is one of the best approaches to detect tumor in women. In this research paper, a combination of selection methods for seed region growing image segmentation is suggested to detect breast tumor. The suggested method has been divided into following parts: First, the pre-processing of breast image is performed. Second, the automatic threshold for binarization process is calculated. Third, the number of seed points and its position in the breast image are determined automatically using density of pixels value. Fourth, a method for calculation of threshold value is proposed for the purpose of region creation in seed region growing. For the evaluation purpose, the proposed method was applied and tested on the RIDER MRI breast dataset from National Biomedical Imaging Archive (NBIA). After the test was performed, it was observed that proposed algorithm gives 90% accuracy, 88% True Negative Fraction, 91% True Positive Fraction, 10% Misclassification Rate, 94% Precision and 86% Relative Overlap which is better than other existing methods. It not only gives better evaluation measure but also provides segmentation method for multiple tumor detection.

Satellite imagery consists of highly complex spatial features that make it difficult for traditional image processing techniques to use them for classification tasks. In this paper, we propose a novel method to use these hidden fractal information that naturally exist in these satellite images. We have designed a fractal-based descriptor which generates a scale invariant fractal image for easier fractal-based pattern extraction and uses it as an added feature vector that is combined with the original image and fed into a VGG-16 deep learning architecture which successfully classifies even low-resolution satellite images with an f1-score of 0.78.

Among all image enhancement techniques, histogram equalization is the most used technique. However, preserving brightness is the main issue, and it creates a weird look by destroying its originality. This paper proposes a new method that has command on the brightness issue of histogram equalization to enhance the quality of microscopic images. The method splits the histogram of each color channel into two sub-histograms based on their mean as the threshold and supplanting their cumulative distribution with Kumaraswamy distribution. The proposed method is tested with color microscopic images of cancer-affected lymph nodes gathered from Biological Image Repository IICBU, and objective and subjective assessments confirm that the proposed approach performs more efficiently compared to other state-of-the-art methods.

The digitalization has been challenged with the security and privacy aspects in each and every field. In addition to numerous authentication methods, biometrics has been popularized as it relies on one’s individual behavioral and physical characters. In this context, numerous unimodal and multimodal biometrics have been proposed and tested in the last decade. In this paper, authors have presented a comprehensive survey of the existing biometric systems while highlighting their respective challenges, advantage and limitations. The paper also discusses the present biometric technology market value, its scope, and practical applications in vivid sectors. The goal of this review is to offer a compact outline of various advances in biometrics technology with potential applications using unimodal and multimodal bioinformatics are discussed that would prove to offer a base for any biometric-based future research.

Recently, numerous challenging problems have existed for transforming different image types (thermal infrared (TIR), visible spectrum, and near-infrared (NIR)). Other types of cameras may lack the ability and features of certain types of frequently-used cameras that produce different types of images. Based on camera features, different applications might emerge from observing a scenario under specific conditions (darkness, fog, night, day, and artificial light). We need to jump from one field to another to understand the scenario better. This paper proposes a fully automatic model (GVTI-AE) to manipulate the transformation into different types of vibrant, realistic images using the AutoEncoder method, which requires neither pre-nor post-processing or any user input. The experiments carried out using the GVTI-AE model showed that the perceptually realistic results produced in the widely available datasets (Tecnocampus Hand Image Database, Carl dataset, and IRIS Thermal/Visible Face Database).

In this paper, we present two steps in the process of automatic annotation in archeological images. These steps are feature extraction and feature selection. We focus our research on archeological images which are very much studied in our days. It presents the most important steps in the process of automatic annotation in an image. Feature extraction techniques are applied to get the feature that will be used in classifying and recognizing the images. Also, the selection of characteristics reduces the number of unattractive characteristics. However, we reviewed various images of feature extraction techniques to analyze the archaeological images. Each feature represents one or more feature descriptors in the archeological images. We focus on the descriptor shape of the archaeological objects extraction in the images using contour method-based shape recognition of the monuments. So, the feature selection stage serves to acquire the most interesting characteristics to improve the accuracy of the classification. In the feature selection section, we present a comparative study between feature selection techniques. Then we give our proposal of application of methods of selection of the characteristics of the archaeological images. Finally, we calculate the performance of two steps already mentioned: the extraction of characteristics and the selection of characteristics.

Inspite of technological advancement, inherent processing capability of current age sensors limits the desired details in the acquired image for variety of remote sensing applications. Pan-sharpening is a prominent scheme to integrate the essential spatial details inferred from panchromatic (PAN) image and the desired spectral information of multispectral (MS) image. This paper presents an effective two-stage pan-sharpening method to produce high resolution multispectral (HRMS) image. The proposed method is based on the premise that the HRMS image can be formulated as an amalgam of spectral and spatial components. The spectral components are estimated by processing the interpolated MS image with a filter approximated with modulation transfer function (MTF) of the sensor. Sparse representation theory is adapted to construct the spatial components. The high-frequency details extracted from the PAN image and its low resolution variant are utilized to construct dual dictionaries. The dictionaries are jointly learned by an efficient training algorithm to enhance the adaptability. The hypothesis of sparse coefficients invariance over scales is also incorporated to reckon the appropriate spatial information. Further, an iterative filtering mechanism is developed to enhance the quality of fused image. Four distinct datasets generated from QuickBird, IKONOS, Pléiades and WorldView-2 sensors are used for experimentation. The comprehensive assessment at reduced-scale and full-scale persuade the effectiveness of proposed method in the retention of spectral information and intensification of the spatial details.

Surface Reconstruction is the most potent aspect of 3D computer vision. It allows recapturing or imitating of the shape of real objects. It also provides sufficient knowledge regarding the mathematical foundation for rendering applications which are widely used for analyzing medical volume data, modeling, 3D interior designing, architectural designing. In our paper, we have mentioned various algorithms and approaches for surface reconstruction and their applications. Moreover, we have tried to emphasize the necessity of surface reconstruction for solving image analysis related problem.

Human activity recognition from video sequences has emerged recently as pivotal research area due to its importance in a large number of applications such as real-time surveillance monitoring, healthcare, smart homes, security, behavior analysis, and many more. However, lots of challenges also exist such as intra-class variations, object occlusion, varying illumination condition, complex background, camera motion, etc. In this work, we introduce a novel feature descriptor based on the integration of magnitude and orientation information of optical flow and histogram of oriented gradients which gives an efficient and robust feature vector for the recognition of human activities for real-world environment. In the proposed approach first we computed magnitude and orientation of the optical flow separately then a local-oriented histogram of magnitude and orientation of motion flow vectors are computed using histogram of oriented gradients followed by linear combination feature fusion strategy. The resultant features are then processed by a multiclass Support Vector Machine (SVM) classifier for activity recognition. The experimental results are performed over different publically available benchmark video datasets such as UT interaction, CASIA, and HMDB51 datasets. The effectiveness of the proposed approach is evaluated in terms of six different performance parameters such as accuracy, precision, recall, specificity, $F$-measure, and Matthew’s correlation coefficient (MCC). To show the significance of the proposed method, it is compared with the other state-of-the-art methods. The experimental result shows that the proposed method performs well in comparison to other state-of-the-art methods.

In this work, we have proposed Notch filter method to enhance MRI brain images. The proposed method performs better when compared with the existing methods from the literature. The performance is evaluated using quantitative measures like Michelon Contrast (MC), entropy, Peak Signal-to-Noise Ratio (PSNR), Structure Similarity Index Measurement (SSIM) and Absolute Mean Brightness Error (AMBE), as a parameter on publically available BRATS-2018 & 2019 dataset. Overall, the proposed method performs well in comparison to the other existing methods.

Image watermarking is one of the most accepted solutions protecting image authenticity. The method presented in this paper not only provides the desired outcome also efficient in terms of memory requirements and preserving image characteristics. This scheme effectively utilizes the concepts of block truncation coding (BTC) and lifting wavelet transform (LWT). The BTC method is applied to observe the binary watermark image corresponding to its gray-scale image. Whereas, the LWT is incorporated to transform the cover image from spatial coordinates to corresponding transform coordinates. In this, a quantization-based approach for watermark bit embedding is applied. And, the extraction of binary watermark data from the attacked watermarked image is based on adaptive thresholding. To show the effectiveness of the proposed scheme, the experiment over different benchmark images is performed. The experimental results and the comparison with state-of-the-art schemes depict not only the good imperceptibility but also high robustness against various attacks.

Multilevel thresholding is a basic method in image segmentation. The conventional image multilevel thresholding algorithms are computationally expensive when the number of decomposed segments is high. In this paper, a novel and powerful technique is suggested for Crow Search Algorithm (CSA) devoted to segmentation applications. The main contribution of our work is to adapt Darwinian evolutionary theory with heuristic CSA. First, the population is divided into specified groups and each group tries to find better location in the search space. A policy of encouragement and punishment is set on searching agents to avoid being trapped in the local optimum and premature solutions. Moreover, to increase the convergence rate of the proposed method, a gray-scale map is applied to out-boundary agents. Ten test images are selected to measure the ability of our algorithm, compared with the famous procedure, energy curve method. Two popular entropies i.e. Otsu and Kapur are employed to evaluate the capability of the introduced algorithm. Eight different search algorithms are implemented and compared to the introduced method. The obtained results show that our method, compared with the original CSA, and other heuristic search methods, can extract multi-level thresholding more efficiently.

Finger-vein identification, a biometric technology that uses vein patterns in the human finger to identify people. In recent years, it has received increasing attention due to its tremendous advantages compared to fingerprint characteristics. Moreover, Deep-Convolutional Neural Networks (Deep-CNN) appeared to be highly successful for feature extraction in the finger-vein area, and most of the proposed works focus on new Convolutional Neural Network (CNN) models, which require huge databases for training, a solution that may be more practicable in real world applications, is to reuse pretrained Deep-CNN models. In this paper, a finger-vein identification system is proposed, which uses Squeezenet pretrained Deep-CNN model as feature extractor from the left and the right finger vein patterns. Then, combines this Deep-based features by using a feature-level Discriminant Correlation Analysis (DCA) to reduce feature dimensions and to give the most relevant features. Finally, these composite feature vectors are used as input data for a Support Vector Machine (SVM) classifier, in an identification stage. This method is tested on two widely available finger vein databases, namely SDUMLA-HMT and FV-USM. Experimental results show that the proposed finger vein identification system achieves significant high mean accuracy rates.